WYJ-520-1 Walbro Engine - Overview

This item is a genuine Walbro replacement part that has been sourced from the original manufacturer to be used with small engine carburetors. The kit is used when cleaning and rebuilding the carburetor. This kit includes all the items that are recommended to replace when servicing the carburetor. The repair kits are sold individually.

This is an original Walbro replacement part. The metering lever pin is designed by the manufacturer for use in carburetors. This part is made of metal, and is used to secure the metering lever and allow it to pivot as needed. You may require a screwdriver and pliers or a punch set when replacing this item. This part is sold individually.

This is a genuine OEM sourced component which is specially made for use with Walbro carburetors commonly installed on lawn and garden equipment. Its purpose is to ensure that the fuel that goes through the unit is free of dust and other harmful contaminants. Unfortunately, over time it will wear out and may get clogged eventually requirin...Read moreg a replacement. Keep in mind this high-quality fuel inlet screen is made of durable material and is sold individually. Make sure to refer to the appropriate diagrams of your model for the correct location and application of this part.

This is a genuine OEM air purge body assembly which is designed for use with Walbro carburetors that are commonly installed on a variety of lawn and garden equipment. By pressing on the purge bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be pur...Read moreged back into the tank in the fuel return line. If the part is missing or is damaged, this will provide an identical replacement. Note, this high-quality assembly is sold as an individual item. Keep in mind the rubber bulb and the bracket to secure it are both sold separately and are not included with the air purge body assembly.

This is an original Walbro replacement part. The pump body assembly is designed by the manufacturer for use in carburetors. This part is made of metal, and is placed in the top of the carburetor between the metering diaphragm and the pump diaphragm. You may require a screwdriver or Allen wrench when replacing this item. This part is sold individually.