WHES30 Whirlpool Water Softener - Overview

Hello, Thank you for your question. The brine line is the tube that connects the tank to the water softener control valve. Water or air leakages will cause a malfunction of your water softening system and an overflow of water in the brine tank. Other causes of brine tank overflow can be due to obstructions. Look for salt clogging the inside the tank. We hope this helps, good luck with this repair.

Hi Don, Thank you for your question. According to your owner's manual, the water softener has a salt monitor indicator light to remind you to add salt to the storage tank. You must set salt level each time salt is added to the water softener. To set this monitor system: 1. Lift the salt lid and level the salt in the storage tank. 2. The salt level scale, on the brinewell inside the tank, has numbers from 0 to 8. Observe the highest number the leveled salt is at, or closest to. 3. Press the SET SALT LEVEL button until black ovals correspond to the salt level number. At level 2 or below, the “Check Salt Level” LED indicator will flash. If you want to turn the salt monitor off, press the SET SALT LEVEL button until “SALT LEVEL OFF” shows in the display. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!