WA-167-1 Walbro Engine - Overview

This repair kit also known as a carburetor rebuild kit is sourced from the original manufacturer for use in small and outdoor power equipment. This kit includes a pump cover gasket to prevent fuel leaks from the carburetor fuel pump section; a diaphragm gasket to seal the diaphragm in the carburetor; a metering diaphragm gasket to seal th...Read moree metering diaphragm which controls the fuel flow within the carburetor; an inlet needle valve gasket to provide a seal for the inlet needle valve which controls the fuel flow into the carburetor; a metering lever gasket to seal the metering lever; and a welch plug to seal small holes and passages in the carburetor body. The kit also includes reeds a needle valve a needle lever and air filter. These components are critical for maintaining proper fuel delivery preventing fuel leaks and ensuring optimal performance for the carburetor. If your equipment is experiencing hard starting rough idling reduced power output and leakages this kit is designed to provide all the parts you need to restore your carburetor in one convenient package.

Genuine Walbro replacement part, this item is sold individually. By pressing the bulb, it will purge the carburetor of air. Fuel will be forced up from the fuel tank through the fuel line then into the carburetor. Then the excess fuel will be forced back into the fuel tank through the fuel return line. At some time the primer will lose ...Read moreits elasticity or crack and need to be replaced. We have an article and video on How to Replace a Primer Bulb, in our Repair Center. That can be found on the front page of our site.

This is a Genuine OEM rebuild kit designed for Walbro Carburetors. This kit contains all the necessary Gaskets and Diaphragms needed to rebuild your carburetor. If your engine runs sluggish or it dies shortly after starting it, you may need to rebuild your carburetor. Replacing these items you would need a Screwdriver and Pliers.

This authentic OEM metering diaphragm assembly is housed within the carburetor of your lawn and garden equipment. Positioned between the carburetor body and the fuel pump, it regulates fuel delivery and maintains the air-fuel ratio within the engine. It has a self-adjusting vacuum system and responds to the amount of fuel being drawn into...Read more the engine. When the engine runs at higher speeds, more fuel is pulled in and the diaphragm compresses. As a result, the pin in the center of the diaphragm pushes against the metering level and lifts the regulator inlet needle, letting additional fuel flow from the pump into the reservoir. If the assembly malfunctions, you may experience engine stalling, rough idling, or notice fuel odor, pooling, or dripping around the carburetor area. To remove the metering diaphragm, refer to your user guide for instructions on locating and accessing the carburetor. This typically involves removing the fuel pump cover screw and pump cover, followed by the fuel pump diaphragm and gasket. Remember to blow through the external pulse hole on the body casting and remove the filter screen before proceeding to remove the four screws securing the metering diaphragm plate and the metering diaphragm itself. Please note that this replacement part is sold individually.

This is a genuine item that is supplied by the original equipment manufacturer for use with Walbro carburetors. It is an identical replacement for missing or a faulty plug-welch that was installed on a new unit, please make sure to refer the appropriate diagrams of your model for the correct location and application of this hardware. Keep...Read more in mind this high-quality part is made of durable material and is sold individually.

This item is a genuine Walboro replacement part that is OEM sourced to ensure high quality. The check valve is intended to be used with carburetors for small engines. This item fits into the center of the air purge body. This item is used to allow the purge bulb to force air through the check valve causing fuel be drawn from the tank to the fuel pump and through the carburetor. This part is priced as a single item.

This is an OEM part sourced directly from the manufacturer. The spring is commonly found in Walbro carburetors. This part is made of metal, and is used to provide tension to the needle. Please be aware that there are different needles used in the machine. Refer to the parts diagram to be sure of ordering the correct part. This part is sold individually.

Carburetor