VT233502 Campbell Hausfeld Compressor - Overview

This is an authentic part that is supplied directly from the original equipment manufacturer for use with Craftsman Air Compressors. The exhaust flapper valve attaches on the valve plate under the cylinder head. The most common reasons for replacing the flapper valve is if there is poor performance, or the air leaks out of the intake air ...Read morefilter while the unit is running, damaged/sticking valves is a common issue when you have low compression, and can also cause the motor/engine to stall and too much pressure in the pump's crankcase. This part is sold individually. Here is a list of tools that are needed to install the flapper valve are a screwdriver, socket wrench, and a wrench.

This replacement flapper valve is a high quality item that is sourced from original equipment manufacturer for use with Campbell Hausfeld air compressors. This part is secured under the cylinder head helping to control the fuel-air mixture admitted to the cylinder. As the piston rises in the cylinder a vacuum is created in the crankcase b...Read moreeneath the piston. This part is made from durable metal and it is sold individually.

This is the genuine OEM supplied replacement part that is used on Campbell Hausfeld air compressors. A gasket is a mechanical seal which fills the space between the cylinder and the cylinder head. It is recommended to replace gaskets when replacing the cylinder or doing a maintenance repairs on the unit to ensure proper seal. Over time th...Read moree material may get compressed and crack eventually requiring replacement. Please note this durable composite material gasket is sold individually.

This is an OEM part sourced directly from the manufacturer. The screw is commonly found in Craftsman compressors and paint sprayers. This part is made of metal, and is generally used to secure the flapper valves in the cylinder head. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be ...Read moresure of ordering the correct part. You will require a screwdriver when replacing this item. The screw is provided as an individual replacement part.

This is an authentic part is sourced directly from the original equipment manufacturer. The bearing cap gasket is commonly found in Craftsman air compressors. The purpose of this component is to provide a tight seal between connected parts. Please check the appropriate diagrams of your model for the exact location and the correct application of this part. Note, one durable cap gasket is included.

This is an authentic Campbell Hausfeld replacement part, sourced from the original manufacturer for use with air compressors. The special set screw is commonly used to secure the pump's flywheel. This set screw is available as an individual replacement part, please see model diagram for associative parts.

This genuine manufacturer-sourced part is specially designed for Campbell Hausfeld air compressors. It is an important component which provides a tight seal between connected components. Unfortunately, over time it will wear out and it may begin to crack eventually requiring a replacement. To ensure the correct repair procedure, refer to ...Read morethe appropriate diagrams for your model. Note, this high-quality gasket is made of durable composite material and is sold as an individual item. A wrench set will be needed to perform this repair.

This is an authentic manufacturer-sourced part which is specially designed for Campbell Hausfeld air compressors. It is an identical replacement for a missing or faulty 1/4 inch plug that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of ...Read morethis hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.