UT70001A Ryobi Trimmer - Overview

This is a genuine OEM replacement part, sold individually. This Bumper helps keep the fuel tank in place, and minimizes vibration of the fuel tank. This part is used with a variety of string trimmers, compatible with the models listed below.

Springs are used within outdoor power equipment to provide tension and shock absorption, depending on their application and use. This spring is designed for use within trimmers/brush cutters and is made to provide tension on the spool reel mechanism, and in some cases may be used to advance the line whenever portions of it are cut off. Th...Read moreis spring measures approximately 1.3-inches in length when extended and comes as an individual part. If you notice the line/spool in your trimmer is not advancing or is coming too quickly, the spring may be damaged and need replacing. Since this spring is a high-use part, it is not uncommon for it to lose tension over time and need to be replaced. To replace the spring, you will need to unscrew the covering cap, remove the spool feeding reel, remove the old spring and install the new spring with the rest of the assembly. Make sure to feed the line back into the appropriate feeding holes prior to operation of the trimmer.

The air filter in your trimmer keeps the engine running smoothly. It filters out dirt and debris from the air before it enters the engine, ensuring that clean air is used for efficient fuel combustion. This helps protect the engine and maintain its performance. If the air filter is clogged or damaged, it should be replaced to avoid reduce...Read mored engine performance, increased fuel consumption, and potential engine damage. To remove the existing filter, consult your user guide to locate the air filter housing. Depress the locking tab on the housing cover, lift it off, and remove the filter. Follow any specific installation instructions for your machine model. Please note that this OEM air filter is sold individually.

This is a genuine OEM replacement part, it is sold individually. This is the fuel pick-up line it is connected to the line coming from the fuel tank by means of a inline fuel fitting. It is then connected to the carburetor. It is used on the model numbers shown below.

A genuine replacement part which is supplied directly from the original equipment manufacturer for use with Homelite and Ryobi handheld lawn and garden equipment. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality screw is made of durable metal and is sold individually.

This is a genuine OEM approved component which is specially designed for use with Homelite and Ryobi handheld lawn and garden equipment. It provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. Keep in mind this high-quality screw is made of durable metal and is sold individually. It is a s...Read moreelf-tapping screw that will form threads in the material it is being driven into. Make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this part.

This is a genuine replacement part sourced from the original manufacturer for use with outdoor power equipment. The special screw is used with a variety of equipment and its application can vary based on the model. This screw is sold individually, please see diagram for part location and usage.

It is an authentic OEM sourced item that is specially designed for Homelite handheld lawn and garden equipment. The carburetor is designed to mix the air and the gas before the combustible mixture goes to the engine, over time components may wear out and begin to fail eventually requiring a replacement. This high-quality metal body item i...Read mores sold individually, keep in mind it includes one composite material gasket and one rubber hose. Make sure to check the appropriate diagrams of your specific model for the correct location and application of this carburetor.

This is an OEM replacement part for a Homelite trimmer. This pulley is part of the starter assembly and houses the rope. This is made of a high-quality plastic and is sold as an individual replacement part. Please note the rope, spring, and container are all sold separately.