TR-20B - Overview

This spring peened replacement component is designed for turf rakes, dethatchers, and seeders to help maintain effective thatching and soil conditioning performance. Manufactured from durable metal for long service life, it supports proper tine or spring action during operation, allowing air, water, and nutrients to reach the soil surface...Read more. It’s a practical OEM replacement for restoring reliable, consistent performance when existing springs become worn, bent, or damaged.

Genuine Classen replacement part, this item is sold individually. The spacer is used on the Classen Turf Rakes & Turf Seeders shown below. The spacers are placed on the Satelite Shaft in between the Blades to keep them the correct distance apart. Theses spacers have a tendency to wear, it is advised to keep a few of the on hand for future use.

The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has...Read more broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

This replacement push rod is specially designed for Kohler engines commonly installed on a variety of lawn and garden equipment. It is an authentic high-quality item that is sourced from the original equipment manufacturer. The rod is attached to the camshaft to push the exhaust valve open during the exhaust stroke. A bent pushrod can not...Read more only affect your engine\\\'s performance, but it can also seriously damage other parts if the problem is not taken care of immediately. Make sure to check the diagrams of your model for the exact location and the correct installation of this part. It is made of durable metal and is sold individually. You will need a screwdriver and a wrench set to take the engine apart in order to perform this repair.

This oil seal is a genuine OEM replacement part designed for lawn and garden equipment. It is a small, circular rubber seal with a diameter of 2 3/8 inches, used to prevent oil leakage between the gear cover and gear shaft, and prevent the entry of contaminants. You will need to replace this oil seal if it is brittle, cracked, or has lost...Read more elasticity. A faulty seal will cause the gears to lose lubrication, increase friction damage, and prematurely wear down the parts. Remember to drain the oil from your equipment before beginning any repairs. Carefully pry the old seal from its mounting position and clear off any debris and residue on the area. Place the new seal in position and ensure it is securely fitted.

This is a genuine Kohler replacement part that has been sourced from the original manufacturer to be used with small engines. The metal screw is used to secure the head to the top of the cylinder assembly. This screw requires a hex ratchet set to install and is priced as a single item.

This OEM part is sold individually and is a direct replacement part sourced from the manufacturer. The Woodruff Key is used to allow mating parts such as a shaft and gear to rotate together. It is made of silver-colored metal and is found in various locations, depending on your model. This part will wear over time and needs to be replace...Read mored when damaged, worn, or if the mating parts no longer rotate together. Customers rate this repair as Easy.

Made of durable black rubber, this Oil Seal is an authentic OEM part for use in over 150 models of small engines. This part is sold individually, not as part of a kit or assembly. It will be found on the crankcase opening, where the crankshaft is. The Seal should be replaced when it becomes worn or damaged. When it malfunctions, you'll s...Read moreee oil visibly leaking. To complete this repair, you will need a screwdriver, pliers, a socket set, a wrench set, a nut driver, and an impact wrench. Customers rated the difficulty of this repair as Expert.

This is a genuine Kohler replacement part that has been OEM sourced and is intended to be used with small engines. The gasket is used to seal the connection between the breather valve and the cylinder head. This item may require a socket ratchet to install and is sold individually.

This Spark Plug is a genuine OEM sourced replacement part for various small engines. It is white and silver, made of metal and ceramic components, and sold individually. The Spark Plug ignites the air-fuel mixture inside the combustion chamber. Before replacing, you can attempt to clean the spark plug with fine sandpaper of around 180 g...Read morerit, followed by spraying it with carburetor cleaner and wiping it dry. If this does not resolve your issue, it will need to be replaced. Ensure you gap and torque it to the manufacturer specifications. To complete this repair, you will need a spark plug socket, a socket set, and a torque wrench. Customers rate this repair as Easy.

This manufacturer-supplied replacement part is designed for use with Kohler engines commonly installed on lawn and garden equipment. The bushing helps to secure the throttle linkage. It provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. Please refer to the appropriate diagrams of your mo...Read moredel for the exact location and the correct installation of this part. Keep in mind this high-quality bushing is made of durable plastic and is sold individually. You will need a wrench set to remove the housing in order to gain access to the bushing.

It is an OEM item that is made for use with Kohler engines commonly installed on a variety of lawn and garden equipment. This is the valve that the push rod ride inside of which will push the exhaust valve open during the exhaust stroke. A bent push rod or a damaged lifter-valve can not only affect your engine\\\'s performance, they can s...Read moreeriously damage other parts if the problem is not taken care of immediately. This is a high-quality replacement for a missing or a damaged component that was installed on a new unit. To ensure the correct location and installation of this item, refer to the diagrams of your specific model. Note, one durable metal lifter-valve and a tube of lube are included. You will need a screwdriver and a wrench set to take apart the engine when performing this repair.