TPS-2510 Tanaka Pole Saw - Overview

This OEM replacement part is used to pump fuel from the tank to the carburetor in order to start the engine. It may also be referred to as a Primer Bulb. It is made of durable black plastic and is sold individually. This part will be found in various locations, depending on your model; refer to your owners manual to locate it on your mach...Read moreine, but is commonly found on the side of the air cleaner or carburetor. To complete this repair, you will need a screwdriver. The Purge Bulb needs to be replaced when it is cracked or damaged. It will become fatigued through regular use and may leak fuel when it is malfunctioning. Customers rated this repair as Easy.

This individually sold grommet is a genuine OEM part and is used for a variety of different small engine/outdoor lawn equipment. The return fuel line from the carburetor is installed through this grommet, which creates a seal to prevent future leaks and ignition issues. Over time and through exposure to fuel, the grommet can wear down, le...Read moreading to cracks, tears, and missing pieces. If you notice fuel is leaking during operation, or are having issues with starting the engine, this grommet may be the cause. Depending on your model, installing the return line in the grommet and then installing both together in the fuel tank may be easiest, rather than installing them separately.

The fuel pipe/fuel line assembly is a genuine OEM parts kit used in gas-powered outdoor equipment with dimensions of 5mm x 160mm. It includes a pipe or line, which carries fuel from the tank to the carburetor, and a rubber grommet which holds the fuel line in place. The grommet also has a flange that prevents it from being pulled into the...Read more body of your equipment. Over time the grommet may wear down and the fuel line can become brittle and crack causing fuel leakages and difficulty starting or running your equipment. Therefore, it is important to routinely inspect this assembly and replace it when it shows signs of wear. Before your repair, drain the fuel for your safety and to prevent contaminating the fuel tank. To install a new fuel pipe assembly, simply pull off the old grommet and detach the fuel line. Carefully insert your new fuel line into the new grommet and connect the line to the carburetor and the fuel filter inside the fuel tank on your equipment.

This oil tank cover set is sourced from the original manufacturer for use in poles saws. It includes one plastic cover, four collars, four Phillips head screws, four metal washers, and one gasket to seal the area between the plastic cover and the tank. The set can be found at the rear end of the pole saw where it is responsible for protec...Read moreting the oil tank by preventing dirt and debris from entering, and contaminating the oil. Over time the cover and gasket can wear down, crack, or become loose, and unable to protect the tank. This will cause oil leakages, contamination, low cutting power, and eventually total equipment failure. Remove the faulty cover and gasket from the oil tank and clean the surrounding area. Install the new gasket on to the oil tank opening and place the new cover on top of it. Position the four collars into the holes on the cover and then secure the cover to the tank using the screws and washers to complete your repair.

The cleaner element, also known as an air cleaner or air filter is a genuine OEM replacement filter for use in lawn and garden equipment. The filter is made of foam and is housed in a plastic/metal frame. Note that the filter cover and the frame are sold separately. The filter regulates air flow to the engine and prevents dirt and debris ...Read morefrom entering the engine and potentially damaging it. Over time the filter may become clogged or may tear resulting in black smoke coming from the engine, difficulties starting the equipment, and reduced overall performance. To replace the air filter, remove the filter cover and pull out the element. Install the new filter into the housing and reattach the filter cover. To keep your equipment functioning efficiently, you should regularly inspect the air filter and clean or replace it as needed.

This is a genuine OEM replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article and vide...Read moreo on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.

This fuel pipe is manufactured for Tanaka gas powered handheld equipment. It is a genuine OEM sourced item, not an aftermarket imitation. This fuel pipe allows the gas to flow between the tank and the carburetor. By pressing the primmer bulb it will fill the carburetor with fuel, once it is full the excess fuel will be forced back into th...Read moree tank through the fuel return line. It is made from flexible clear plastic and it is sold individually.

This is an authentic OEM sourced replacement part commonly utilized on Hitachi and Tanaka handheld lawn and garden equipment. The purpose of a spark plug is to deliver electric current to an internal combustion engine. Symptoms of a failing or faulty spark plug include difficulty starting the saw or a complete failure to start. Please not...Read moree, this item is sold individually. You would need a spark plug wrench or a socket wrench to complete this repair.

This item has been OEM sourced to ensure a high level of quality. The clip is intended to be used with trimmers and blowers from Hitachi and Tanaka. The metal clip is part of the fuel system. The clip is used to fasten the fuel filter and the fuel line assembly. This part is priced as an individual replacement part.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Tanaka and Hitachi lawn and garden equipment. The purpose of this gasket is to provide an air-tight seal for the carburetor, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. ...Read moreIt is a high-quality item that is made of durable composite material and is sold individually, over time it may wear out and begin to crack eventually requiring a replacement.