THT-240 Tanaka Hedge Trimmer - Overview

The fuel pipe/fuel line assembly is a genuine OEM parts kit used in gas-powered outdoor equipment with dimensions of 5mm x 160mm. It includes a pipe or line, which carries fuel from the tank to the carburetor, and a rubber grommet which holds the fuel line in place. The grommet also has a flange that prevents it from being pulled into the...Read more body of your equipment. Over time the grommet may wear down and the fuel line can become brittle and crack causing fuel leakages and difficulty starting or running your equipment. Therefore, it is important to routinely inspect this assembly and replace it when it shows signs of wear. Before your repair, drain the fuel for your safety and to prevent contaminating the fuel tank. To install a new fuel pipe assembly, simply pull off the old grommet and detach the fuel line. Carefully insert your new fuel line into the new grommet and connect the line to the carburetor and the fuel filter inside the fuel tank on your equipment.

Also known as a priming bulb, this OEM replacement part is an individually sold rubber primer bulb. Since it is made of rubber, it will eventually lose its elasticity and crack or break,and need replacing. It is designed for use with a variety of different small engine equipment and is also known as a purge bulb. Pressing this primer bulb...Read more forces fuel through the fuel line and into the carburetor from the fuel tank. Once the carburetor is has a sufficient level of fuel, any excess fuel will be forced back into the fuel tank through the return line attached to the carburetor. If your primer bulb has a darker appearance or has lost its elasticity and does not return to its original shape, it means the rubber will likely soon crack, which will lead to fuel leaking into the engine and ignition system. To replace your primer bulb, simply remove the outside cover and primer bulb cover and replace the bulb within its housing.

This item has been OEM sourced to ensure a high level of quality. The clip is intended to be used with trimmers and blowers from Hitachi and Tanaka. The metal clip is part of the fuel system. The clip is used to fasten the fuel filter and the fuel line assembly. This part is priced as an individual replacement part.

A genuine item which is supplied directly from the original equipment manufacturer for use with Tanaka handheld lawn and garden equipment. The tank is designed to hold the fuel which is needed for the engine, over time it may wear out or get damaged eventually requiring a replacement. This high-quality item is sold individually, it includ...Read morees the durable plastic, the fuel hose, and the rubber grommet. Keep in mind the fuel cap and other parts are all sold separately.

This is a genuine OEM sourced element-cleaner designed for Tanaka gas powered equipment. It is used to filter out dust and other contaminants from going into the engine. Please note, this foam element-cleaner is sold individually. To replace this filter you should only need a screwdriver. • Make sure to disconnect the spark plug • R...Read moreemove the cover screw • Take off the cover and replace the filter element • Reassemble and test the unit

This is a genuine Tanaka replacement part that has been sourced from the original manufacturer to be used with trimmers, edgers, hedge trimmers, blowers, and gas powered drills. The plastic pulley is used to store the starter rope and to engage the starter cam. This item is sold as an individual replacement part.

The pump filter body attaches to the fuel tank. It is an OEM replacement part for use in bicycle engines, trimmers, drills, generators, and brush cutters made by Tanaka. This is available as an individual replacement part and is made out of metal and a felt material. It might require a screwdriver, a set of pliers, a socket set, and a nutdriver to replace this part if it becomes broken or torn.

This starter rope is an authentic replacement part provided by the original equipment manufacturer. It is frequently used for yard equipment such as trimmers. This rope is used to manually start the engine. It is sold individually, and it should be replaced if it is frayed or beginning to wear out.

This authentic item is sourced directly from the original equipment manufacturer for Tanaka lawn and garden equipment. It is an identical replacement for a missing or a faulty pulley-starter-assembly that helps to pull-start the engine. Please make sure to check the appropriate diagrams of your specific model for the correct location and ...Read moreuse of this part. Keep in mind this high-quality component is made of durable metal and is sold individually.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Tanaka handheld lawn and garden equipment. It is an identical replacement for a missing or a damaged button-stop that was installed on a new unit. This is the part that allows a user to stop the engine, please make sure to refer to the a...Read moreppropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality button is made of durable plastic and is sold individually.

This is a genuine replacement part sourced from the original manufacturer for use with bicycle engines made by Tanaka. The user will need to replace this small washer if it is missing or not working correctly. This part is made of durable material and sold individually.