THT-210SA Tanaka Hedge Trimmer - Overview

The fuel pipe/fuel line assembly is a genuine OEM parts kit used in gas-powered outdoor equipment with dimensions of 5mm x 160mm. It includes a pipe or line, which carries fuel from the tank to the carburetor, and a rubber grommet which holds the fuel line in place. The grommet also has a flange that prevents it from being pulled into the...Read more body of your equipment. Over time the grommet may wear down and the fuel line can become brittle and crack causing fuel leakages and difficulty starting or running your equipment. Therefore, it is important to routinely inspect this assembly and replace it when it shows signs of wear. Before your repair, drain the fuel for your safety and to prevent contaminating the fuel tank. To install a new fuel pipe assembly, simply pull off the old grommet and detach the fuel line. Carefully insert your new fuel line into the new grommet and connect the line to the carburetor and the fuel filter inside the fuel tank on your equipment.

This is a genuine OEM replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article and vide...Read moreo on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.

This fuel pipe is manufactured for Tanaka gas powered handheld equipment. It is a genuine OEM sourced item, not an aftermarket imitation. This fuel pipe allows the gas to flow between the tank and the carburetor. By pressing the primmer bulb it will fill the carburetor with fuel, once it is full the excess fuel will be forced back into th...Read moree tank through the fuel return line. It is made from flexible clear plastic and it is sold individually.

This is a genuine OEM sourced element-cleaner designed for Tanaka gas powered equipment. It is used to filter out dust and other contaminants from going into the engine. Please note, this foam element-cleaner is sold individually. To replace this filter you should only need a screwdriver. • Make sure to disconnect the spark plug • R...Read moreemove the cover screw • Take off the cover and replace the filter element • Reassemble and test the unit

This is an original replacement part manufactured for use with outdoor power equipment. The recoil spring is used to provide tension to rewind the starter rope after pulling to start the engine. This spring is available as an individual replacement part and is also part of the starter assembly. Please see model diagram for associative parts.

This is an authentic Tanaka replacement part that has been sourced from the original manufacturer to be used with hedge trimmers. The plastic tank cap is used to cover and seal the tank\\\'s fuel fill spout to prevent leaks. This cap is available as an individual replacement part. Tools are not needed to install this part.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Tanaka handheld lawn and garden equipment. It is an identical replacement for a missing or a damaged button-stop that was installed on a new unit. This is the part that allows a user to stop the engine, please make sure to refer to the a...Read moreppropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality button is made of durable plastic and is sold individually.

This cutter guide bar is a precision metal component that supports and guides the hedge trimmer blades at the gearcase, helping keep the cutting assembly properly aligned during operation. By stabilizing blade movement, it reduces excess play, uneven cutting, and premature wear on the blade set, contributing to cleaner cuts and smoother p...Read moreerformance. Replacing a worn or damaged guide helps restore cutting accuracy, extend blade life, and maintain reliable operation on petrol hedge trimmers used for regular or professional landscaping work.

This is an original part from Tanaka for use with Hedge Trimmers. The clutch drum engages with the clutch to spin the flex shaft and cutting head. The most common reasons for replacing the clutch drum are when the blades won't work or the gearbox is noisy. This part is sold individually. The tools that you will need to replace the clutch drum are two 10mm sockets, pliers and a T-27 Torx bit.

This is an authentic manufacturer-sourced replacement washer which is commonly utilized on Hitachi and Tanaka lawn and garden equipment. It helps to distribute the pressure evenly and provide a tight seal between connected parts. Please make sure to refer to the appropriate diagrams of your model for the correct location and application o...Read moref this hardware. Keep in mind this high-quality washer is made of durable metal material and is sold individually.