Quick Question!

Have you ever purchased from PartSelect.com before?

Models > TGO336BGW1

TGO336BGW1 Tappan Wall Oven - Overview

Get Parts and Repair Help for TGO336BGW1

If you know the wall oven repair part you need, you can browse the list of all parts on the TGO336BGW1, or you can search by name or part description. You can also find your part by where it is located on the TGO336BGW1 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Oven Light Socket

The oven light socket allows you to screw in a light bulb so that you can see the inside of your oven. The light socket is located in the back of your oven, so you will need to rem...




Surface Burner Control Knob

Sold Individually. This knob accepts a D-shaped shaft.


Flat Style Oven Igniter

This is known as a flat style oven igniter for your range. The purpose of the oven igniter is to get so hot that it will ignite the gas for the oven burner when engaged. To make this repair you will need a 5/16 nut driver, and a Phillips screwdriver. The most common sign of a defective igniter is if the coil is broken or burnt out, or it glows red/orange instead. Your igniter must glow white hot in order to properly allow the gas to come out of the safety valve.


Upper Thermostat Knob

This thermostat knob will accept a D-shaped shaft.


Thermostat Knob

This knob accepts a D-shaped shaft.


Thermostat Bulb Clip


Fluorescent Light Bulb

This fluorescent bulb illuminates the control panel.


Hex Nut



Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven light receptacle broken - bulb base broke off

  • Customer: Paul from Spokane Valley, WA
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 39 of 51 people found this instruction helpful
Turned power off at electrical panel. Pulled oven away from wall. Removed back cover (6 screws), then unplugged wires from old receptacle. I had to pull the squeeze clips backwards & break them to remove the old receptacle - couldn't squeeze them enough to remove them otherwise. The old receptacle came out through the inside of the oven, and the new one snap... read more

The neon tube over the stove top went out

  • Customer: Gunther from Columbia, SC
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 7 of 15 people found this instruction helpful
Put a new one in. read more

light in range control panel/splash guard went out

  • Customer: JACK from PATCHOGUE, NY
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 1 of 5 people found this instruction helpful
first I removed the 4 screws holding the cover in place. then I removed the 26" flourescent tube by slowing twisting it free. Then I attemped to buy another one at 6 or 8 stores with no luck. While surfing the web for tappan range replacement bulbs, your web site popped up. Thank god. read more