Models > TGB557CCB2

TGB557CCB2 Tappan Wall Oven - Overview

Sections of the TGB557CCB2

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Light Bulb – Part Number: 316538904
Light Bulb
★★★★★
★★★★★
(11)
PartSelect #: PS12751166
Manufacturer #: 316538904
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If...
$19.88
  In Stock
Order within the next 46 mins and your part ships today!
LENS – Part Number: 5304524341
LENS
★★★★★
★★★★★
(5)
PartSelect #: PS16218465
Manufacturer #: 5304524341
The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to remove the existing...
$10.52
  On Order
Broiler Pan Grate Insert – Part Number: 5304494997
Broiler Pan Grate Insert
★★★★★
★★★★★
(3)
PartSelect #: PS9864838
Manufacturer #: 5304494997
This includes pan and insert.
$63.35
  In Stock
Order within the next 46 mins and your part ships today!
SCREW – Part Number: 216858001
SCREW
PartSelect #: PS2331296
Manufacturer #: 216858001
Sold Individually.   No Longer Available
Control Knob – Part Number: 5303304677
Control Knob
PartSelect #: PS464161
Manufacturer #: 5303304677
Sold Individually.   No Longer Available
Flat Glow Bar Igniter – Part Number: 318177710
Flat Glow Bar Igniter
★★★★★
★★★★★
(3)
PartSelect #: PS444179
Manufacturer #: 318177710
This flat glow bar igniter is designed for gas ovens. The function of the part is to ignite the gas to light the oven burner. If your gas igniter does not glow, or if it glows but will not light, you ...
$316.06
  In Stock
Order within the next 46 mins and your part ships today!
Door/Bracket Screw – Part Number: 215822000
Door/Bracket Screw
PartSelect #: PS423766
Manufacturer #: 215822000
Sold Individually.   No Longer Available
Outer Oven Door Glass - Black – Part Number: 318051516
Outer Oven Door Glass - Black
PartSelect #: PS725634
Manufacturer #: 318051516
  No Longer Available
Light Lens Retainer Clip – Part Number: 5304400195
Light Lens Retainer Clip
PartSelect #: PS470510
Manufacturer #: 5304400195
This is a light lens retainer clip and it is used in conjunction with the oven on your range. This retainer clip secures the light lens to the oven cavity. The part is made entirely of metal, and it i...   No Longer Available
Flat Style Oven Igniter - Broiler – Part Number: 5303935068
Flat Style Oven Igniter - Broiler
★★★★★
★★★★★
(1)
PartSelect #: PS470131
Manufacturer #: 5303935068
This flat style gas oven igniter comes with a bracket and wires. Its amperage range is between 3.2 and 3.6 amps.
$57.07
  In Stock
Order within the next 46 mins and your part ships today!

Questions And Answers for TGB557CCB2

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the TGB557CCB2

[Viewing 1 of 1]
Gas igniter glows, but will not light
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broiler igniter not glowing
1) Turn off the gas and disconnect the power

2) Remove oven door. There requires that you remove the two square drive (SD) bolts on the inside, partially close the door and lift it off the hinges.

3) Remove the grills.

4) At the back remove the rear shield (aluminum panel held by 2 SD sheet metal screws.

5) this exposes the broiler igniter and its two wires. If its been replaced in past, there should be two porcelain screw-on wire connectors. Undo the connectors by turning them counter-clockwise. With a volt-ohmmeter, measure the resistance across the igniter. If its open circuited, its broken. If not, then its in the circuit board, and this help stop here. If this is the original igniter, it ends in a plastic connector. Disconnect by pulling it apart from its mating plug and again, check the continuity of the igniter. If its defective, reconnect the connector and cut each wire on the igniter side. Strip back about 1/2 inch of insulation on each lead.

6) inside the oven, using the SD driver, remove the 4 screw securing the broiler burner from the roof of the oven. The burner can now be removed, pulling the burner away from the gas jet on the right.

7) The igniter is now exposed and can be remove by removing the two SD drive screws.

8) Replace with the new igniter, being careful not to touch the black element, and feeding the wires though the rear oven wall.

9)Reverse the above dissembly procedure.

10) Broil the sausages.
Parts Used:
Flat Style Oven Igniter - Broiler
  • Steven from Silver Spring, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken lens over oven light
Your service was OUTSTANDING...Ordered one afternoon, and before lunch time the next day, the delivery man rang my door bell...Thanks a bunch for you excellent service.....
Parts Used:
LENS
  • Leslie from Warsaw, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
11 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven light bulb went dark; it needed replacing
Twisted replacement bulb into place easily. Let there be light!
Parts Used:
Light Bulb
  • Lise from CEDAR GROVE, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!