TED-232 Tanaka Gas Engine Drill - Overview

This fuel line/pipe is a genuine manufacturer approved replacement part. It is commonly used with Tanaka gas powered engines. The fuel line is what delivers the fuel from the fuel tank into the carburetor. Over time it will deteriorate, become brittle and may crack. This item is made out of flexible plastic material and it is sold individually.

This authentic OEM replacement spark plug is specifically designed for use with Tanaka power equipment and is sourced directly from the original manufacturer—not an aftermarket imitation. It delivers the electric current needed to ignite the air-fuel mixture in the engine’s combustion chamber, ensuring reliable performance. For optimal re...Read moresults, the spark plug should be properly gapped according to the specifications in your equipment’s owner’s manual. This item is sold individually and requires a spark plug wrench or socket wrench for installation or removal.

The clip goes between the pump filter body assembly and the rubber pipe cap. This is an authentic part from Tanaka for use in bicycle engines, chainsaws, blowers, edgers, trimmers, brush cutters, and power augers. This item is available individually and is made of metal. During the installation process, a wrench and a screwdriver might b...Read moree needed to replace this part. It will need to be replaced if it bends or breaks.

The chuck and key are sold together as a set. These are OEM Tanaka parts directly sourced from the manufacturer for use in drills. During the installation process, a set of pliers might be needed to replace these parts. They are made out of metal and will need to be replaced if they break.

It is a genuine replacement gasket which is supplied directly from the original equipment manufacturer for use with Tanaka power equipment. This special gasket provides an air-tight seal for the carburetor, over time material tends to deteriorate and may crack eventually requiring replacement to ensure peak performance. It is high-quality composite gasket which is sold individually.

This is an authentic replacement part manufactured for use with Tanaka outdoor power equipment. The metal recoil spring provides tension to rewind the starter rope when pull starting a gas powered yard and garden tool. The spring is coiled into the case that connects to the starter rope reel, the recoil spring assembly is sold individually.

This is an authentic Tanaka replacement part that has been sourced from the original manufacturer to be used with bike engines, chainsaws, blowers, gas powered drills, edgers, generators, trimmers, and powered augers. This screw is used with a variety of different types of machines and the application of the screw can vary based on the model of the equipment. The screw is available as an individual replacement part.

The pump filter body attaches to the fuel tank. It is an OEM replacement part for use in bicycle engines, trimmers, drills, generators, and brush cutters made by Tanaka. This is available as an individual replacement part and is made out of metal and a felt material. It might require a screwdriver, a set of pliers, a socket set, and a nutdriver to replace this part if it becomes broken or torn.

This is an authentic item that is supplied by the original equipment manufacturer for use with Tanaka handheld lawn and garden equipment. It is the reel that the rope for the starter mechanism is wrapped around. Note, the rope itself is not included and is sold separately. One durable plastic reel is included. Make sure to refer to the ow...Read moreners manual and the diagrams of your model for the exact location and the correct installation of this component.

This replacement chuck key is a genuine manufacturer sourced item. It is specially produced for use with Tanaka drills. This chuck key is used to tighten and loosen the jaws of the chuck. It is made out of metal and it is sold individually.

This authentic component is supplied directly from the original equipment manufacturer for use with Tanaka lawn and garden equipment. The cap is used to connect the spark plug to the magneto. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. Please make sure to refer to the appropriate d...Read moreiagrams of your model for the correct location and application of this cap spark plug assembly. Keep in mind one durable rubber cap and a metal spring are included.