TDE546RBW2 Tappan Dryer Parts & Repair Help | PartSelect
Models > TDE546RBW2

TDE546RBW2 Tappan Dryer - Overview

Get Parts and Repair Help for TDE546RBW2

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(70)
PartSelect #:PS459829
Manufacturer #:5303281153
This rear drum bearing kit is designed for use with dryers. It supports the rear of the drum in your appliance as it tumbles your clothes during the drying cycle. If your drum will...
$27.29
In Stock
Order within the next 6 hrs and your part ships today!
(35)
PartSelect #:PS1148434
Manufacturer #:134503600
This drum belt, often referred to as a drive belt, is used in the assembly of dryers. It goes around the drum, the idler pulley, and the motor pulley. As the armature on the motor ...
$11.12
In Stock
Order within the next 6 hrs and your part ships today!
(17)
PartSelect #:PS470317
Manufacturer #:5303937139
The upper drum glide is attached to the front panel of your dryer, you can locate it by removing the top portion of your dryer. The drum glide allows the drum to rotate with ease a...
$31.10
In Stock
Order within the next 6 hrs and your part ships today!
(12)
PartSelect #:PS418807
Manufacturer #:131825900
If your dryer does not tumble, will not start, is noisy, or is leaving marks on your clothing, you may need to replace the drum support bearing. The drum is supported at the rear b...
$4.03
In Stock
Order within the next 6 hrs and your part ships today!
(10)
PartSelect #:PS419402
Manufacturer #:134120900
The dryer thermal limiter, also known as a thermal fuse, blows the fuse to cut off power to the dryer when the dryer begins to overheat. Once the dryer reached 220 degrees Fahrenhe...
$10.82
In Stock
Order within the next 6 hrs and your part ships today!
(11)
PartSelect #:PS418433
Manufacturer #:131658800
The door catch on your dryer is an important part as it keeps your dryer door closed, in order to ensure no air or clothes can escape. This part works by holding the door strike, w...
$32.94
In Stock
Order within the next 6 hrs and your part ships today!
PartSelect #:PS417677
Manufacturer #:131390300
This filter collects lint as it passes through the dryer vent.
No Longer Available
(1)
PartSelect #:PS12579101
Manufacturer #:131724301
$6.51
On Order
(1)
PartSelect #:PS418736
Manufacturer #:131777700
This ball hitch provides support to the drum located at the back wall of the dryer. This allows the drum to spin. The bearing may have gone bad and you might notice that the ball i...
$51.33
In Stock
Order within the next 6 hrs and your part ships today!
PartSelect #:PS459766
Manufacturer #:5303281019
This grounding ball is used in dryers and works to prevent friction in the rear bearing when the drum rotates. If your dryer is making a squealing, loud, banging noise or will not ...
$9.78
In Stock
Order within the next 6 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Squealing noise

  • Customer: Cynthia from Lexington, SC
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Wrench (Adjustable), Wrench set
  • 506 of 522 people found this instruction helpful
We followed the instructions for the drum glide replacement and changed the belt and drum support bearing piece, cleaned it out too. Works like a charm. Thanks for saving us a bundle. read more

Loud Squeaking

Rear Drum Bearing Kit – Part Number: 5303281153
  • Customer: Frank from Boyertown, PA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 303 of 312 people found this instruction helpful
1. Unplug dryer from outlet
2. Using Lg. flat screwdriver, pry under the front edge of the top and release two spring tabs
3. Lift up top and tilt back out of your way
4. Unscrew two phillips scews on inside of front panel
5. Lift up and out the front panel. Two spring clips at bottom.
6. Rlease tension on drum belt at the motor. Acc... read more

Thermal Limiter opened

  • Customer: Stephen from Newnan, GA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 229 of 297 people found this instruction helpful
Unplugged Dryer.
Opened top of Dryer, over the drum.
Removed Thermal Limiter.
Tested the Thermal Limiter - found it was open.
Checked all vents and exhaust tube for lint build-up.
Replaced Thermal Limiter.
Closed top of dryer.
Plugged Dryer back.
Tested Dryer - it works. read more