TBL-505 Tanaka Leaf Blower / Vacuum - Overview

This individually sold grommet is a genuine OEM part and is used for a variety of different small engine/outdoor lawn equipment. The return fuel line from the carburetor is installed through this grommet, which creates a seal to prevent future leaks and ignition issues. Over time and through exposure to fuel, the grommet can wear down, le...Read moreading to cracks, tears, and missing pieces. If you notice fuel is leaking during operation, or are having issues with starting the engine, this grommet may be the cause. Depending on your model, installing the return line in the grommet and then installing both together in the fuel tank may be easiest, rather than installing them separately.

Also known as a priming bulb, this OEM replacement part is an individually sold rubber primer bulb. Since it is made of rubber, it will eventually lose its elasticity and crack or break,and need replacing. It is designed for use with a variety of different small engine equipment and is also known as a purge bulb. Pressing this primer bulb...Read more forces fuel through the fuel line and into the carburetor from the fuel tank. Once the carburetor is has a sufficient level of fuel, any excess fuel will be forced back into the fuel tank through the return line attached to the carburetor. If your primer bulb has a darker appearance or has lost its elasticity and does not return to its original shape, it means the rubber will likely soon crack, which will lead to fuel leaking into the engine and ignition system. To replace your primer bulb, simply remove the outside cover and primer bulb cover and replace the bulb within its housing.

This fuel pipe is manufactured for Tanaka gas powered handheld equipment. It is a genuine OEM sourced item, not an aftermarket imitation. This fuel pipe allows the gas to flow between the tank and the carburetor. By pressing the primmer bulb it will fill the carburetor with fuel, once it is full the excess fuel will be forced back into th...Read moree tank through the fuel return line. It is made from flexible clear plastic and it is sold individually.

This is an authentic OEM sourced replacement part commonly utilized on Hitachi and Tanaka handheld lawn and garden equipment. The purpose of a spark plug is to deliver electric current to an internal combustion engine. Symptoms of a failing or faulty spark plug include difficulty starting the saw or a complete failure to start. Please not...Read moree, this item is sold individually. You would need a spark plug wrench or a socket wrench to complete this repair.

This fuel pipe is an OEM part designed for use with handheld lawn and garden equipment. This pipe is used to deliver fuel from the fuel tank to the carburetor, but because of the build material, it may wear over time and eventually wear out completely. Made from high-quality, durable rubber, this pipe is sold individually. Measuring 6-inc...Read morehes long, this pipe features a rubber grommet in the center. It is recommended that you replace the fuel filter for your equipment as well, if this fuel pipe needs to be replaced. Check the user manual for your equipment for exact placement and installation of this component.

The purpose of this replacement cap is to keep the fuel in the tank. It is a genuine item that is supplied directly from original equipment manufacturer for use with Tanaka lawn and garden equipment. Please note this durable plastic fuel tank cap is sold individually. It includes the rubber seal that will prevent fuel from leaking.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Tanaka and Hitachi lawn and garden equipment. The purpose of this gasket is to provide an air-tight seal for the carburetor, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. ...Read moreIt is a high-quality item that is made of durable composite material and is sold individually, over time it may wear out and begin to crack eventually requiring a replacement.

It is a genuine part that is supplied by the original equipment manufacturer for Tanaka handheld lawn and garden equipment. The purpose of this assembly is to allow air into the fuel tank so that a vacuum is not created when the fuel is being fed through the fuel line. It is an identical replacement for a missing or a faulty part that was...Read more installed on a new unit. To ensure the proper replacement procedure, refer to the appropriate diagrams for your model. It is a high-quality air vent which is made of durable material and is sold individually. Replacing it is a simple task that should not require any special tools. Disconnect the old vent from the hose and connect the new one.

This is a high quality authentic Tanaka replacement part, not an aftermarket imitation. It is sourced from original equipment manufacturer for use with gas powered equipment. The purpose of it is to filter out dust and other debris from contaminating the carburetor. It will get clogged over time restricting the fuel flow, at this point it...Read more should be replaced. It is made from metal with a fabric filter material and it is sold individually.

This is a genuine item that is supplied by the original equipment manufacturer for use with Tanaka backpack blowers and chainsaws. The pump allows a user to fill the carburetor with fuel, unfortunately, over time the part may crack or get damaged eventually requiring a replacement. Keep in mind this high-quality component is made of durab...Read morele plastic and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item.

This is a genuine OEM sourced replacement part which is specially designed for Tanaka lawn and garden equipment. Its purpose is to ensure that the air that goes through is free of dust and other harmful contaminants, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is sold individually.

This is an authentic Tanaka replacement part that has been sourced from the original manufacturer to be used with bike engines, chainsaws, blowers, gas powered drills, edgers, generators, trimmers, and powered augers. This screw is used with a variety of different types of machines and the application of the screw can vary based on the model of the equipment. The screw is available as an individual replacement part.