TBE515 (2009) Troy-Bilt Edger - Overview

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also be called a Flange Lock. This nut is designed to lock in place, preventing vibrations and other parts coming loose. This nut may be locate...Read mored in multiple locations on your machine, refer to your owners manual to determine if this is the correct part. You will need a wrench or socket set and a torque wrench to complete this repair. You should only torque the nut to the manufacturer recommendation, no tighter. You will need to replace this part when it is worn or damaged. While this part can wear through regular use, it is most commonly damaged through improper use of a wrench or socket. Customers describe this repair as Easy.

This Switch is a black, plastic on/off switch for a trimmer. Installation of this manufacturer-certified switch is rated as "Easy" and requires a screwdriver, wrench set and socket set. Refer to your make, model, and diagrams to ensure this switch is correct for you.

An engine that starts but soon stops may have a blocked or damaged carburetor. Other signs include poor speed control, fuel leaks, and a primer that will not fill. The carburetor controls the mix of fuel and air needed for the engine to run. Similar problems can come from old fuel, a blocked filter, cracked hoses, or a dirty spark plug. C...Read moreheck these items first. Confirm fit with the complete machine model number because similar engines may use different parts. Allow the engine to cool and empty the fuel tank before service. Reconnect each hose and control cable in its original place, then test for leaks outdoors.

Ensure the efficient running of your line trimmer with this professionally built Troy-Bilt fuel tank assembly, complete with fuel lines. The fuel tank possesses the crucial role of housing the fuel needed for your trimming operations. To guarantee a safe installation procedure, ensure to drain the leftover fuel from the tank into an appro...Read morepriately approved storage container, preferably situated in a well-ventilated area. Bear in mind to put on your work gloves to safeguard your hands during this process. Trust in the high-quality design and function of this Troy-Bilt fuel tank assembly to provide years of reliable service.

This sealed ball bearing is used in mower deck spindle and pulley assemblies to reduce friction and support smooth rotation. Designed to fit securely in the housing, it helps extend component life and maintain consistent cutting performance. It’s a direct replacement for worn or noisy bearings during deck or pulley service.

This is a replacement part sourced directly from the manufacturer for Craftsman trimmers and edgers. The fuel cap prevents fuel from spilling out of the fuel tank by covering the opening on the fuel tank. To install the fuel cap requires no tools, simply twits it into place. This part is made of plastic and is sold individually.

This is an original Craftsman replacement part. The edger blade is designed by the manufacturer for use in edgers. This part is made of metal, and is the active part of the edger, which is spun by the engine assembly to cut neat lines into the edges of the lawn or garden. You will require a wrench when replacing this item. This part is sold individually.

The Recoil Spring is a silver, metal spring which attaches inside the starter assembly. It is used to wind the rope back around the pulley after it has been pulled. If broken, the starter rope will not retract and the part must be replaced. This spring is rated "Medium" difficulty to install and will requires a screwdriver, pliers and a wrench set.

This is a genuine OEM sourced part which is specially designed for use with lawn and garden equipment. It is an identical replacement for a missing or a faulty bolt that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind t...Read morehis high-quality hex bolt is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.