TBC-4500 Tanaka Trimmer - Overview

Also known as a priming bulb, this OEM replacement part is an individually sold rubber primer bulb. Since it is made of rubber, it will eventually lose its elasticity and crack or break,and need replacing. It is designed for use with a variety of different small engine equipment and is also known as a purge bulb. Pressing this primer bulb...Read more forces fuel through the fuel line and into the carburetor from the fuel tank. Once the carburetor is has a sufficient level of fuel, any excess fuel will be forced back into the fuel tank through the return line attached to the carburetor. If your primer bulb has a darker appearance or has lost its elasticity and does not return to its original shape, it means the rubber will likely soon crack, which will lead to fuel leaking into the engine and ignition system. To replace your primer bulb, simply remove the outside cover and primer bulb cover and replace the bulb within its housing.

This is a genuine OEM replacement part, it is sold individually. The Fuel Filter is inside of the fuel tank. Its purpose is to filter out dirt and other debris from contaminating the carburetor. It will at sometime become clogged and restrict the fuel getting to the carburetor,and will have to be replaced. We do have an article and vide...Read moreo on How to Replace the Fuel Filters in Your Outdoor Power Equipment.. You can see this by going to the front page of our site and clicking on Repair Center.

This OEM-made cleaner element, also known as an air filter, helps keep the engine clean by filtering the air that goes inside. It is 1/4 inches in height, 3 1/2 inches in length, 1/2 inches in width, and usually found in a housing near the engine of your lawn equipment. To check if it is broken, look for tears, holes, and debris on it. Wh...Read moreen the filter is damaged or clogged, it restricts the airflow in your machine. This can cause problems like potential misfires, expensive repairs, and even engine failure. To replace your cleaner element, you will need to access the element housing and remove retaining screws or clips using a socket or screwdriver. Once you slide out the housing cover, lift the element out of your machine. Prior to installing the new cleaner element, it is advisable to refer to your owners manual as your machine may have specific instructions for this procedure.

This item has been OEM sourced to ensure a high level of quality. The clip is intended to be used with trimmers and blowers from Hitachi and Tanaka. The metal clip is part of the fuel system. The clip is used to fasten the fuel filter and the fuel line assembly. This part is priced as an individual replacement part.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Tanaka and Hitachi lawn and garden equipment. The purpose of this gasket is to provide an air-tight seal for the carburetor, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. ...Read moreIt is a high-quality item that is made of durable composite material and is sold individually, over time it may wear out and begin to crack eventually requiring a replacement.

This is a genuine Tanaka part for use with Trimmers and Edgers. The throttle lever allows you to control engine speed. The most common reason for replacing the throttle lever is if it is damaged or not engaging the throttle properly. This part is sold individually. The tools that you will need to replace the throttle lever is a T-25 Torx head screwdriver and a flat-head screwdriver.

This is a genuine Tanaka replacement part, sourced directly from the manufacturer. The oil seal is found in many Tanaka power tools such as chainsaws and brush cutters. This part is a metal ring with a high-quality plastic inner ring, and is used to prevent oil leaks or contamination of the crank case. You may need a screwdriver and wrench to replace this part. This item is sold individually.

It is an authentic OEM supplied replacement part which is specially designed for use with Tanaka handheld lawn and garden equipment. This air cleaner assembly helps to prevent dust and other debris from entering the carburetor. Keep in mind it is made of high-quality plastic and is sold individually. Please make sure to refer to the appro...Read morepriate diagrams of your model for the correct location and application of this component.

This starter rope is an authentic replacement part provided by the original equipment manufacturer. It is frequently used for yard equipment such as trimmers. This rope is used to manually start the engine. It is sold individually, and it should be replaced if it is frayed or beginning to wear out.

This authentic component is supplied directly from the original equipment manufacturer for use with Tanaka lawn and garden equipment. The cap is used to connect the spark plug to the magneto. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. Please make sure to refer to the appropriate d...Read moreiagrams of your model for the correct location and application of this cap spark plug assembly. Keep in mind one durable rubber cap and a metal spring are included.

This is a genuine manufacturer-supplied screw which is specially designed for use with Tanaka handheld trimmers. The part helps to secure and protect an air filter element from dust and other harmful contaminants. It is an identical replacement for a missing or a damaged air cleaner cap that was installed on a new unit, please make sure t...Read moreo refer to the appropriate diagrams for the correct location and use of this component. Keep in mind this high-quality plate is made of durable plastic and is sold individually.