TBC-262 Tanaka Trimmer - Overview

This item has been OEM sourced to ensure a high level of quality. The clip is intended to be used with trimmers and blowers from Hitachi and Tanaka. The metal clip is part of the fuel system. The clip is used to fasten the fuel filter and the fuel line assembly. This part is priced as an individual replacement part.

This authentic OEM replacement spark plug is specifically designed for use with Tanaka power equipment and is sourced directly from the original manufacturer—not an aftermarket imitation. It delivers the electric current needed to ignite the air-fuel mixture in the engine’s combustion chamber, ensuring reliable performance. For optimal re...Read moresults, the spark plug should be properly gapped according to the specifications in your equipment’s owner’s manual. This item is sold individually and requires a spark plug wrench or socket wrench for installation or removal.

The clip goes between the pump filter body assembly and the rubber pipe cap. This is an authentic part from Tanaka for use in bicycle engines, chainsaws, blowers, edgers, trimmers, brush cutters, and power augers. This item is available individually and is made of metal. During the installation process, a wrench and a screwdriver might b...Read moree needed to replace this part. It will need to be replaced if it bends or breaks.

This piston ring is a small metal ring in an engine that seals the gap between the piston and the cylinder wall. It prevents the escape of combustion gases and maintains compression. When damaged, oil will leak into the combustion chamber and cause performance problems within the engine. You may experience rough running and a loss of powe...Read morer or notice that blue smoke is coming out from the exhaust when this happens. To remove the piston ring from your machine, you need to detach the piston from the engine. Using a small screwdriver, pry the damaged piston ring away from the piston and slide it off. Be careful not to scratch the piston nor the cylinder walls during this process. You may also need to compress the ring to remove or install it onto the piston. Please note that this authentic OEM replacement part is sold individually. It is recommended to replace your piston rings all at once as they wear out at the same rate, so be sure to read your user manual and confirm how many rings your machine will need.

It is a genuine replacement gasket which is supplied directly from the original equipment manufacturer for use with Tanaka power equipment. This special gasket provides an air-tight seal for the carburetor, over time material tends to deteriorate and may crack eventually requiring replacement to ensure peak performance. It is high-quality composite gasket which is sold individually.

This is a genuine Tanaka replacement part, sourced directly from the manufacturer. The oil seal is found in many Tanaka power tools such as chainsaws and brush cutters. This part is a metal ring with a high-quality plastic inner ring, and is used to prevent oil leaks or contamination of the crank case. You may need a screwdriver and wrench to replace this part. This item is sold individually.

The pump filter body attaches to the fuel tank. It is an OEM replacement part for use in bicycle engines, trimmers, drills, generators, and brush cutters made by Tanaka. This is available as an individual replacement part and is made out of metal and a felt material. It might require a screwdriver, a set of pliers, a socket set, and a nutdriver to replace this part if it becomes broken or torn.

This authentic component is supplied directly from the original equipment manufacturer for use with Tanaka lawn and garden equipment. The cap is used to connect the spark plug to the magneto. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. Please make sure to refer to the appropriate d...Read moreiagrams of your model for the correct location and application of this cap spark plug assembly. Keep in mind one durable rubber cap and a metal spring are included.

A genuine item that is supplied by the original equipment manufacturer for use with Tanaka handheld lawn and garden equipment. The purpose of this cleaner assembly is to ensure the air supplied to the engine is free of dust and other harmful contaminants, over time it may get clogged or damaged eventually requiring a replacement. This com...Read moreplete assembly is sold individually, it includes the plastic base, the cover, and the foam element cleaner.