TBC-205 Tanaka Trimmer - Overview

This authentic OEM replacement spark plug is specifically designed for use with Tanaka power equipment and is sourced directly from the original manufacturer—not an aftermarket imitation. It delivers the electric current needed to ignite the air-fuel mixture in the engine’s combustion chamber, ensuring reliable performance. For optimal re...Read moresults, the spark plug should be properly gapped according to the specifications in your equipment’s owner’s manual. This item is sold individually and requires a spark plug wrench or socket wrench for installation or removal.

The clip goes between the pump filter body assembly and the rubber pipe cap. This is an authentic part from Tanaka for use in bicycle engines, chainsaws, blowers, edgers, trimmers, brush cutters, and power augers. This item is available individually and is made of metal. During the installation process, a wrench and a screwdriver might b...Read moree needed to replace this part. It will need to be replaced if it bends or breaks.

The element-cleaner attaches to the air cleaner cover. It is an OEM from Tanaka for use in hedge trimmers, brush cutters, and power augers. This item is sold individually. A screwdriver and a wrench might be required during the replacement of this part. This part is made out of foam and will need to be replaced if it becomes dirty or tears.

The pump filter body attaches to the fuel tank. It is an OEM replacement part for use in bicycle engines, trimmers, drills, generators, and brush cutters made by Tanaka. This is available as an individual replacement part and is made out of metal and a felt material. It might require a screwdriver, a set of pliers, a socket set, and a nutdriver to replace this part if it becomes broken or torn.

This is a genuine OEM part. The Tanaka hex. nut 5 is composed of durable metal, and is designed for use with a variety of small engines. This item secures parts together with the help of a bolt or screw. The hex. nut 5 is sold individually. It is encouraged to purchase additional hex. nuts, as they can wear over time and regular use. A wrench is of course, helpful in making the repair or replacement.

This is an authentic manufacturer made replacement part which is specially designed for use with brush cutters. When the pull rope is engaged, the starter spring causes the engine turn fast enough for the ignition module to generate a spark to ignite the fuel in the cylinder. This part is made of metal and is sold individually. For instal...Read morelation you will need a screw driver and socket wrench. Turn the starter spring to build tension and recoil the rope inside.

This is an authentic manufacturer-sourced replacement washer which is commonly utilized on Hitachi and Tanaka lawn and garden equipment. It helps to distribute the pressure evenly and provide a tight seal between connected parts. Please make sure to refer to the appropriate diagrams of your model for the correct location and application o...Read moref this hardware. Keep in mind this high-quality washer is made of durable metal material and is sold individually.