T40SX-LM Bostitch Nailer - Overview
Sections of the T40SX-LM
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
NUT-NYLON M5X.80
PartSelect #: PS12527109
Manufacturer #: MHE5080-100
This is an authentic OEM sourced component which is specially made for use with Bostitch and Porter Cable mailers and staplers. It is a standard hardware which has multiple applications, please make s...
$6.40
In Stock
KIT-TRIGGER VALVE
PartSelect #: PS12531525
Manufacturer #: TVA6
This is a genuine Bostitch replacement part that fits all BT brad nailers and all S32 staplers. If trigger leaks air or if tool misfires often, try replacing trigger valve. This kit contains one (1) e...
$50.77
In Stock
Questions And Answers for T40SX-LM
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem re ... Read more solved
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem re ... Read more solved
Read less
Parts Used:
-
Richard from Bogalusa, LA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
6 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!