ST2527 (UT-20812) Homelite Trimmer - Overview

This is a genuine OEM replacement part, sold individually. This Bumper helps keep the fuel tank in place, and minimizes vibration of the fuel tank. This part is used with a variety of string trimmers, compatible with the models listed below.

Springs are used within outdoor power equipment to provide tension and shock absorption, depending on their application and use. This spring is designed for use within trimmers/brush cutters and is made to provide tension on the spool reel mechanism, and in some cases may be used to advance the line whenever portions of it are cut off. Th...Read moreis spring measures approximately 1.3-inches in length when extended and comes as an individual part. If you notice the line/spool in your trimmer is not advancing or is coming too quickly, the spring may be damaged and need replacing. Since this spring is a high-use part, it is not uncommon for it to lose tension over time and need to be replaced. To replace the spring, you will need to unscrew the covering cap, remove the spool feeding reel, remove the old spring and install the new spring with the rest of the assembly. Make sure to feed the line back into the appropriate feeding holes prior to operation of the trimmer.

This is an OEM replacement part and is sold individually. Its purpose is to filter out dust and debris from contaminating the carburetor. When replacing the filter you can open the package in comes in and put a bit of two cycle oil in the bag and let it absorb into the filter. Then remove it from the bag and squeeze it with a paper towe...Read morel to remove the excess oil. This will aid the filter in filtering out the unwantables.

This is a genuine OEM approved component which is specially designed for use with Homelite and Ryobi handheld lawn and garden equipment. It provides an identical replacement for a missing or a faulty hardware that was installed on a new unit. Keep in mind this high-quality screw is made of durable metal and is sold individually. It is a s...Read moreelf-tapping screw that will form threads in the material it is being driven into. Make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this part.

This is a genuine Homelite replacement part. It is sold individually. By pressing the bulb it will purge the air from the carburetor. Then fuel will come up from the fuel tank through the fuel line then into the carburetor. The excess fuel will be forced back into the tank through the fuel return line. Over time the primer will lose its elasticity or crack and need to be replaced.

This starter pulley is an OEM part direct from Ryobi. This part is compatible with a variety of lawn and garden devices. The pulley is most often fitted between the air baffle and the container w/spring within the starter assembly. Please consult specific manual and diagrams for repair instructions. This part is sold individually. A screwdriver and a hex key are usually needed in making the replacement.

This is a genuine OEM replacement part, it is sold individually. This is the fuel return-line it is connected from the fuel tank. It is then connected to the carburetor. It is used on the model numbers shown below.

This manufacturer sourced part is designed for use with Homelite and Ryobi handheld lawn and garden equipment. It an identical replacement for a missing or a damaged screw that was installed on a new unit. This is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model ...Read morefor the correct location and application of this component. Keep in mind this high-quality screw is made of durable metal and is sold individually.

This is a genuine replacement part sourced from the original manufacturer for use with outdoor power equipment. The special screw is used with a variety of equipment and its application can vary based on the model. This screw is sold individually, please see diagram for part location and usage.