ST2000FE Shimano Spinning Reels - Overview

This spool washer is a genuine OEM part. The Shimano washer is compatible with many spinning reels. This hardened metal item is fitted in the spool assembly, securing the main shaft. The washer is sold individually, and a screwdriver is needed for making the replacement.

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Shimano fishing reels. The purpose of this washer is to provide a tight seal between connected parts, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable material and is sold individually.

This authentic part is supplied by the original equipment manufacturer for use with Shimano fishing reels. The spring applies tension on the connected parts. Unfortunately, over time it will wear out and it may begin to stretch eventually requiring a replacement. This high-quality spring is made of durable metal and is sold as an individu...Read moreal item. Check the diagrams for your model to ensure the proper repair procedure. A screwdriver might be needed to replace this anti-reverse cam spring.

This hardware is an authentic OEM part which is designed for use with Shimano fishing reels. It helps to secure the bearing. This is an identical replacement for a damaged or a faulty hardware that was installed on a new unit. Keep in mind this high-quality E lock is made of durable metal and is sold individually. Make sure to check the a...Read moreppropriate diagrams of your model for the exact location and the correct installation of this component. You may need pliers to remove and replace it.

This is a Genuine Manufacturer Sourced replacement part used on Shimano Spinning Reels. This part is made out of Metal and it is Sold Individually. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces...Read more friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. To replace this Bearing you would need a Screwdriver. First you would need to disconnect the Reel Handle. Then remove the Side Cover by loosening the Screws that hold it. You should be able to remove the old Bearing. Install new Bearing and Reassemble the Reel

This authentic manufacturer-supplied washer is specially made for use with Shimano fishing reels. It is a special hardware that helps to provide a tight seal between connected components. This is an identical replacement for a missing or a worn washer that was installed on a new unit. One durable metal part is included. Refer to the appro...Read morepriate diagrams for your model to ensure the proper repair procedure. A screwdriver might be needed to replace this hardware.

This authentic OEM washer in your spinning reel is positioned next to the drive gear, which is responsible for turning the spool and controlling the line retrieval. It can be found within the body and side cover of the reel. The washer acts as a cushion, reducing friction and ensuring smooth operation of the reel. Over time, the washer ca...Read moren become worn, damaged, or corroded. Signs that it needs to be replaced include increased noise, decreased smoothness in reel operation, or if the drive gear shows excessive wobbling or play. To remove the existing washer, you need pliers and a screwdriver. Follow the steps in your user manual to remove the spool, rotor, anti-reverse assembly, pinion bearing, and drive gear. Once removed, replace the drive gear and bearing with the new washer, then reassemble the reel in the reverse order.

This spacer is an authentic OEM replacement part supplied by the manufacturer. It is intended for use with several models of Shimano spinning reels. This small, thin, spacer is designed to be placed between the oscillating slider bushing (part RD14071) and the oscillating pawl cover (part RD12596). It is made of plastic and sold individually. A screwdriver is needed to access this part for replacement.

This is a genuine Shimano replacement part that has been sourced from the original manufacturer to be used with spinning reels. The handle screw lock fits into the body of the reel and is used to secure the handle screw. This item is sold as an individual replacement part.