SLS25XP Senco Nailer - Overview

Protect finished surfaces while stapling with this cushion pad, designed to attach to the end of the safety element and help prevent dents, scratches, and other marks caused by the tool's contact point. Made from durable plastic, it acts as a protective buffer between the stapler and the work surface, helping deliver cleaner, more profess...Read moreional results on trim, moulding, and other delicate materials. Replacing a worn or damaged pad can help maintain surface protection and keep your tool performing as intended. Installation is quick and typically involves attaching the pad directly to the safety element.

This is a genuine Senco replacement part, it is sold individually. Its purpose is to retain or secure the Retaining Pins in the Senco models below. It is attached to the pins by pressing them on the beveled end of the pins.

This is an authentic replacement part that is supplied directly from the original equipment manufacturer for use with Senco nailers. It is the special component which helps to provide an air-tight seal for the valve assembly, over time it may wear out and begin to crack eventually requiring a replacement. Please note this durable rubber seal is sold individually.

This is an authentic replacement part manufactured for use with Senco pneumatic nailers and staplers. The special spring is commonly used to provide resistance for the single sequential type of trigger assembly. This spring is available as an individual replacement part.

This spring is an OEM part direct from Senco. The metal spring is compatible with several nailer devices, and is sold individually. This component provides the necessary resistance in the trigger. Pliers and a hex key are often required for the installation.

This is an Authentic OEM replacement part for use with Senco Nailers/Staplers. This item is made out of Rubber and it is Sold Individually. The purpose of this part is to create a seal so air does not leak from the gun. When replacing this Seal it is advised to inspect all of the other Seals and O-Rings for wear. When replacing this item you would need an Allen Wrench Set and Pliers.

The part is an OEM from the Senco manufacturer. The plastic seal is made for use with several nailer devices. This item is fitted onto the valve assembly, providing protection from friction. A hex key is required for the installation. The seal is sold individually.

This is a genuine manufacturer-approved muffler which is specially made for use with Senco nailers and staplers. A muffler is designed to soften the noise coming from the tool. Unfortunately, over time it may wear out and get clogged restricting airflow and eventually requiring a replacement. Refer to the owner's manual for your model to ...Read moreensure the correct application. Note, this high-quality muffler is made of durable material and is sold individually.

It is an authentic OEM sourced replacement part which is specially designed for use with Senco staplers. This part acts as a cushion when the piston/driver retracts back into the cylinder after being fired. Because this part gets so much abuse it has a tendency to crack and fall apart. It is made of high-quality rubber material and is sold individually.

This is an authentic Senco replacement part for use with the SLS25XP wire stapler. This gasket is critical to form a seal between the spacer and the valve assembly. It is recommended to replace the seal when reassembling the tool to ensure a proper seal. This special seal is sold individually.

It is a genuine part that is specially designed for use with Senco nailers and staplers, please note this seal is supplied directly from the original equipment manufacturer. This is an identical replacement for a missing or worn exhaust seal, please make sure to check appropriate diagrams of your model for the correct location and applica...Read moretion of this component. It is a high-quality item which is made of durable rubber and is sold individually.