SKSSV3001S (ASTLSGN) LG Range - Overview

This temperature sensor, also known as a thermistor, is compatible with various makes and types of appliances. This thermistor uses electrical currents to detect the interior temperature of the appliance it is in and by working with the control board, the board adjusts the level of cooling or heating through its heating or cooling element...Read more, depending on what is needed. If your appliance is being improperly heated or cooled, the temperature sensor may be to blame, and can be tested with a multimeter to check for continuity to see whether it is defective. Check your user manual for exact placement of this thermistor and any diagnostic information.

This transparent inner door glass is designed for LG range ovens and serves as a key component in maintaining heat insulation while allowing visibility into the oven during cooking. Made from heat-resistant material, it helps retain internal temperatures for consistent baking and roasting performance. Replacing a damaged or cracked inner ...Read moreglass restores the oven’s energy efficiency and ensures safe operation. This OEM replacement part is manufactured to fit specific LG models and is intended for use when the original glass is chipped, broken, or compromised. Installation typically involves removing the oven door, disassembling the inner panel, and securely fitting the new glass in place. Always confirm your oven model before installation to ensure compatibility.

This sheath heater is a genuine OEM heating element designed for select LG oven and range models. Positioned at the top of the oven interior, it provides the heat necessary for broiling and, in some configurations, baking. Engineered to LG’s specifications, this component ensures consistent performance and even heat distribution. It repla...Read moreces older part numbers and is constructed for durability under high-temperature conditions. Common reasons for replacement include uneven cooking, lack of heat during broil cycles, or visible damage to the element. Installation should be performed with the appliance unplugged, and compatibility must be confirmed using the model number, as similar parts may vary in size and shape.

This terminal block connector provides a secure connection point for electrical wiring, ensuring stable power distribution and safe operation. It is replaced when connections become loose, damaged, or compromised.

This convection fan motor is designed for use within various models of ranges/ovens and is a genuine OEM part. It heats the inside of the appliance through the use of a fan and the airflow it creates. This fan motor comes as an individual part without the attaching fan or hardware to secure it. If you hear scraping and scratching noises c...Read moreoming from the fan assembly at the rear of the range, or if the fan is not rotating, this motor is likely damaged or worn-out and in need of replacement. Failure to do so will result in poor heating throughout your range and generally poor performance throughout. To replace this fan motor, you will need a screwdriver and wrench and will need to first disconnect your range from power. Then you can pull the range out from the wall and remove its rear panel. Disconnect the wires connected to the fan motor terminals and remove the securing hardware for the fan motor, which can now be replaced with the new fan motor. Reassemble the rest of the rear panel and connect your range back to power and test the fan motor.