Models > SHP65T55UC

SHP65T55UC (09) Bosch Dishwasher - Overview

Sections of the SHP65T55UC

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Dishrack Roller - Grey – Part Number: 00611475
Dishrack Roller - Grey
★★★★★
★★★★★
(20)
PartSelect #: PS8727387
Manufacturer #: 00611475
This is a replacement dishrack roller or wheel for your dishwasher. It is made of gray plastic, measures a little over an inch in diameter, and is sold individually. This roller is designed for the lo...
$10.20
  In Stock
Mounting Bracket – Part Number: 00619985
Mounting Bracket
★★★★★
★★★★★
(6)
PartSelect #: PS8728568
Manufacturer #: 00619985
Sold individually.
$13.45
  In Stock
FILTER-MICRO – Part Number: 00645038
FILTER-MICRO
★★★★★
★★★★★
(14)
PartSelect #: PS8730270
Manufacturer #: 00645038
$37.46
  In Stock
Door Seal – Part Number: 00494772
Door Seal
★★★★★
★★★★★
(5)
PartSelect #: PS8723143
Manufacturer #: 00494772
This seal is also referred to as a door gasket, and it is designed for use on dishwashers. It is installed on the door of the appliance, and it seals the space between the tub of the dishwasher and th...
$32.95
  In Stock
Door Handle - Silver – Part Number: 12012913
Door Handle - Silver
★★★★★
★★★★★
(8)
PartSelect #: PS11758453
Manufacturer #: 12012913
$33.76
  In Stock
SPRAY ARM – Part Number: 00745856
SPRAY ARM
★★★★★
★★★★★
(7)
PartSelect #: PS8737036
Manufacturer #: 00745856
$25.55
  In Stock
Dishwasher Screw – Part Number: 00188670
Dishwasher Screw
PartSelect #: PS8698262
Manufacturer #: 00188670
$9.88
  In Stock
HOSE-DRAIN – Part Number: 00744881
HOSE-DRAIN
★★★★★
★★★★★
(4)
PartSelect #: PS8737004
Manufacturer #: 00744881
$20.42
  In Stock
Lower Dishrack – Part Number: 20000533
Lower Dishrack
★★★★★
★★★★★
(4)
PartSelect #: PS12730058
Manufacturer #: 20000533
$109.37
  On Order
HOLDER – Part Number: 00616990
HOLDER
★★★★★
★★★★★
(1)
PartSelect #: PS8728043
Manufacturer #: 00616990
$6.74
  In Stock

Questions And Answers for SHP65T55UC

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Scott
    September 12, 2021
    I'm looking to see if I can replace my black toe kick with a stainless steel one to match the stainless steel panel on the front of dishwasher. Or perhaps there is a stainless steel cover that can be applied over the black toe kick? Is there a specific part number for this that I can order?
    For model number SHP65T55UC
    Hello Scott, Thank you for the question. Very sorry, the Toe Panel/Base Plate is only sold in Black. We hope this helps!

    Was this helpful?
    Thank you for voting!

      Common Symptoms of the SHP65T55UC

      [Viewing 8 of 8]
      Leaking
      Fixed by
      these parts
      Show All
      Not draining
      Fixed by
      these parts
      Show All
      Not cleaning dishes properly
      Fixed by
      these parts
      Show All
      Door latch failure
      Fixed by
      these parts
      Show All
      Not drying dishes properly
      Fixed by
      these parts
      Show All
      Will not dispense detergent
      Fixed by
      these parts
      Show All
      Will not fill with water
      Fixed by
      these parts
      Show All
      Will Not Start
      Fixed by
      these parts
      Show All
      Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
      Broken handle
      1 remove three screws from handle
      2 remove screws from door panel
      3 slide control box up out of outer door panel
      4 outer panel is now free and old handle can be removed
      5 snap in new handle from front of panel
      6 reverse process
      Parts Used:
      Door Handle - Silver
      • Kay from POWELL, OH
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      9 of 9 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Replacing the pocket handle on a Bosch Dishwasher
      I removed the 3 #20 torn screws in the handle, and the six #20 tore screws inside the door that hold the outer door skin in place.

      The plastic handle has a series of molded hooks that allow it to snap into the stainless steel skin.

      To avoid damaging the skin, use a utility knife to cut behind the two large hooks on the bottom of the handle and the one on each end. One trimmed, the handle easily slides out of the door skin.

      The new one will effortlessly snap in-place, then reposition the door skin and fasten with the 9 screw previously removed.
      Parts Used:
      Door Handle - Silver
      • Michael from CASTLE ROCK, CO
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Socket set
      8 of 9 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      rollers broke
      pushed with thumb pressure and snapped rollers into place.....EASY
      Parts Used:
      Dishrack Roller - Grey
      • Dennis from PLEASANTVILLE, NJ
      • Difficulty Level:
        Very Easy
      • Total Repair Time:
        Less than 15 mins
      6 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!