SERIES210-240 MTD Tiller - Overview

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your...Read more owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

Designed for use in various models of lawn and garden equipment, this part is not sold as part of a kit or assembly. It is made of metal, is gold in color, and is sold individually. This part may also be called a Flange Lock. This nut is designed to lock in place, preventing vibrations and other parts coming loose. This nut may be locate...Read mored in multiple locations on your machine, refer to your owners manual to determine if this is the correct part. You will need a wrench or socket set and a torque wrench to complete this repair. You should only torque the nut to the manufacturer recommendation, no tighter. You will need to replace this part when it is worn or damaged. While this part can wear through regular use, it is most commonly damaged through improper use of a wrench or socket. Customers describe this repair as Easy.

Sourced directly from the original manufacturer, this Bell Washer is made of gold-colored metal and is sold individually, not as part of a kit or assembly. It is used to provide spacing between various part assemblies along a shaft. If you hear a strange noise coming from the shaft area, or you notice the Washer is visibly worn or damag...Read moreed, it will need to be replaced. Refer to your owners manual to determine the exact location of this part. Customers rate the difficulty of this repair as Medium.

This cotter pin, also known as a bow tie cotter pin, is a genuine OEM part that is designed for use with lawn and garden equipment. Made of metal and measuring 1.875-inches long, this pin snaps into place and fits within shafts measuring 0.3125-inches to 0.375-inches. This pin can fall out due to vibrations or by being knocked off, so che...Read moreck your user manual for exact replacement of this pin. This part is sold individually.

This is a genuine replacement part manufactured for use with outdoor power equipment. The screw includes a lock washer and is commonly used to secure the motor to the frame. This screw has various applications based on the model of the machine it is used with. The screw is sold as an individual replacement part, please see model diagram for part location and usage.

This is a genuine manufacturer-sourced part which is specially designed for use with garden tillers. It is an identical replacement for a missing or damaged right-hand side outer tine assembly that was originally installed on a new unit. Please make sure to check the appropriate diagrams of your model for the correct location and applicat...Read moreion of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

The Push Cap Rod is a 1/2-inch metal metal cap which can be easily installed with a hammer and pliers. This manufacturer certified part comes in silver and is made of metal. This cap attaches onto an axle to help the wheel stay attached. If broken, the wheel will fall off and the part should be replaced.

This is a MTD and Yard Machines replacement part directly sourced from the manufacturer for use in lawn mowers. The left hand inner tine goes next to the left hand outer tine. It might require a set of pliers and a hammer to replace this item. It will need to be replaced if it breaks or cracks. This part is made of metal and is available individually.

This item is available as an individual replacement part. The v-belt goes around the idler pulley and the flywheel pulley. During replacement, it may require a socket set and a wrench set to help install this part correctly. It is made out of a durable material and will require replacing if it breaks or stretches. This genuine item is sup...Read moreplied by the original equipment manufacturer for use with tillers made by Bolens, MTD, and Yard Machines.

This right-hand inner tine assembly restores proper soil-cutting performance on front-tine rototillers by replacing a bent, worn, or broken tine. Its durable steel construction is shaped to aggressively break up compacted soil, weeds, and turf, helping achieve effective tilling and cleaner seedbed preparation. Suitable for routine mainten...Read moreance or repair, this tine helps maintain balanced tiller operation and consistent cultivation results when one side becomes damaged or excessively worn.

This OEM outer tine assembly is situated on the left side of your tiller, extending from the chain case assembly. It works alongside the inner tine assembly to dig into and break up the soil. Signs of a faulty outer tine assembly include uneven tilling and unusual noises. Look for visible cracks, breaks, or significant wear. A broken tine...Read more will result in decreased performance and potential damage to other components. To remove the existing outer tine, use pliers to detach the pins securing it. If the fasteners are stubborn, apply penetrating oil before attempting to loosen them. This left-hand outer tine assembly is sold separately from the right-hand outer tine and the inner tines.