S253714 Craftsman Lawn Tractor - Overview

The OEM bearing, also known as the flange bearing, is silver, made of metal, and sold individually. It is used on riding mowers to secure the wheel in place and allow it to rotate freely on the shaft. Over time, the part may become worn and damaged, which you will notice if you experience a squealing or grinding sound from the wheel in qu...Read moreestion, or you notice the wheel is sloppy on the shaft. You will need a hammer and punch to complete this repair, which most of our customers rated as easy. Make sure you tap the new bearing into place evenly inside the tire rim.

The Ring Klip Number T5304-75, also known simply as a ring clip, is an OEM part designed to secure your mower wheel to its axle. This part is black, made of metal, and around an inch in length. It is sold individually and may become damaged over time due to wear and fatigue.

This OEM washer, also known as a flat washer, has dimensions of 25/32 x 1-1/4. Silver in color and metal, the washer is sold individually. Although this part can have a range of applications depending on the equipment, its general function is to spread the load under a bolt. Ensure you consult your owners manual or check your model number...Read more to confirm this is the washer you need for your equipment. This part will need to be replaced when your existing one is worn or damaged. It is an easy repair according to our customers, and does not require any special tools.

This is an OEM replacement recoil kit supplied directly by Poulan. The starter pulley spins the flywheel to start the engine when you pull the starter rope. The most common reason for replacing the starter pulley is if the starter rope won't retract. Please note this kit does NOT include the rope and rewind spring. When replacing this part make sure to disconnect the spark plug wire before starting repair.

This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the ...Read morenut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.

The screw with hex washer attaches to the pivot bracket assembly. This item is available as an individual replacement part. This genuine part is supplied by the original equipment manufacturer for use with Craftsman lawn tractors and lawn mowers. A wrench will be necessary during the installation of this item. It is made of metal and will require replacing if it becomes broken or stripped.

This lightbulb is supplied by the original manufacturer and intended for use in lawn tractors and riding mowers with a 12-volt system. It is positioned on the front of the equipment as part of the equipment lighting system. The lightbulb illuminates the area allowing for improved visibility when working in low-light conditions. The lightb...Read moreulb can fail due to various reasons, such as burnout, electrical issues, or physical damage. Once the lightbulb stops functioning, visibility will be reduced which makes it difficult to safely operate the equipment. Before you begin the repair, disconnect your equipment from the power source to avoid electrical hazards. Remove the bulb housing cover, and carefully unscrew the old bulb. Thread the new bulb into the housing and ensure that it is securely seated. Finally, reattach the housing cover, reconnect the power supply, and test the new bulb. Note that this bulb is part of a dual usage system, therefore ensure that you order at least two as each bulb is sold individually.

This authentic manufacturer-sourced part is specially designed for Craftsman riding lawn mowers and garden tractors. It is an identical replacement for a faulty or a missing bushing that was installed on a new unit. This special component helps to secure the fuel tank stem while ensuring a tight seal. Please make sure to refer to the owne...Read morers manual and the appropriate diagrams of your model for the exact location and application of this component. Keep in mind this high-quality bushing is made of durable rubber and is sold individually.

It is a genuine OEM sourced replacement screw which is specially designed for use with Husqvarna, Poulan and Ryobi riding lawn mowers and garden tractors. This item is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for the correct location and use of ...Read morethis item. It is a high-quality hex head screw which is made of durable metal and it is sold individually.

This is an authentic replacement part manufactured for use with lawn and garden equipment. This valve stem is used with equipment that has inflatable tires. The valve is a one-way valve allowing air into the tire while not letting air escape the valve. This valve stem is sold as an individual replacement part, please see model diagram for associative parts and compatibility.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to check t...Read morehe appropriate diagrams of your specific model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.

It is a genuine OEM sourced part is specially designed for riding lawn mowers and garden tractors. The solenoid acts like an electromagnetic switch, it engages and routes the battery electrical supply to the engine starter when the ignition switch is rotated to the start position. Unfortunately, over time it may wear out or get damaged ev...Read moreentually requiring a replacement. Keep in mind this high-quality solenoid is sold individually. You will need a screwdriver and a wrench set to perform this repair.