EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

S20505 Homelite Pole Saw - Overview

Diagrams for S20505

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fastener – Part Number: 678356002
$6.40
In Stock
Fastener
Part #678356002
Adjustment Block
St screw , steel m4 l= 14mm bl – Part Number: 661817001
$6.40
In Stock
St screw , steel m4 l= 14mm bl
Part #661817001
This part is an OEM from Ryobi. The screw (m4 x 14mm bl) is compatible with a variety of lawn and garden tools. The metal screw is often used to help secure the housing assembly. This item is sold individually, and a hex key is required for the installation. It is encouraged to purchase spares, as they can wear over time and regular use.
SPROCKET – Part Number: 610323001
$6.40
In Stock
SPROCKET
Part #610323001
This sprocket is an OEM replacement part for use in chainsaws and pole saws. It is a key component of the chain drive system. The sprocket is a toothed wheel, with a diameter of 1 inch, that is responsible for driving the chain around the bar, allowing it to rotate and cut through materials. It is found at the end of the engine crankshaft. The sprocket can fail if it is inadequately lubricated, if it impacts a hard object, or if its teeth are worn down. A failed sprocket will cause the chain to move slower, slip, or fail to rotate altogether. You will also notice excessive noise and vibration when using your equipment. Therefore, it is important to replace the sprocket to prevent any additional damage to your equipment. Before you begin, ensure that the chain brake is engaged for your safety. Remove the cover on the chainsaw, and pull out the cutting chain and guide bar. Use a sprocket wrench to remove the old sprocket, position the new sprocket onto the crankshaft and secure it with the retaining nut. Each sold individually.
RETAINING RING – Part Number: 670608002
$6.40
In Stock
RETAINING RING
Part #670608002
This retaining ring helps hold a related part in place on compatible chainsaws, pole saws, and trimmers. Replace it if the original ring is lost, bent, or damaged, or if the secured part moves out of position. Remove the battery or disconnect the spark plug wire before repair. Check the exact tool model before ordering.
Hose Clamp – Part Number: 6970001
$6.40
In Stock
Hose Clamp
Part #6970001
It is a genuine OEM approved component that is specially made for use with handheld lawn and garden equipment. The purpose of this clip is to secure the fuel line, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Unfortunately, over time parts may wear out, get damaged or simply lost eventually requiring a replacement. Please note this high-quality clip is made of durable metal and is sold individually.
WASHER – Part Number: 690733001
$6.40
In Stock
WASHER
Part #690733001
Saw chain p 0375 – Part Number: 310987002
$14.09
In Stock
Saw chain p 0375
Part #310987002
Seal – Part Number: 570820001
$6.40
In Stock
Seal
Part #570820001
Rubber seal ring bar oil
M screw steel m6x 1 - 6g l = – Part Number: 660058008
$6.40
In Stock
Cable – Part Number: 531003001
No Longer Available
Cable
Part #531003001
Metal compression spring – Part Number: 679002002
$6.40
In Stock
Metal compression spring
Part #679002002
Key hexagon – Part Number: 681885001
No Longer Available
Key hexagon
Part #681885001