RYPRN33 (090112021) Ryobi Pole Saw - Overview

This genuine OEM guide bar supports the cutting chain on your handheld lawn equipment. It extends from the main body of your machine, holding the chain securely. It is 12 inches long but designed for a maximum cutting length of 10 inches. To determine if a guide bar is broken or damaged, look for visible cracks, bends, or excessive wear. ...Read moreCheck if the guide bar is misaligned or feels loose when attached to the chainsaw. A broken guide bar can cause binding, difficulty cutting, or excessive vibration. Not replacing a damaged guide bar can lead to safety risks, reduced performance, and increased wear. To replace a guide bar, you will need a screwdriver and a wrench. Start by loosening the tension on the blade. Next, remove the bar clamp assembly and lift the blade out of the old bar, taking care to free it from around the sprocket. Finally, remove the old bar. Please note that this guide bar is sold separately from the cutting chain.

This authentic component is supplied by the original equipment manufacturer for use with Ryobi gas pruners. It provides an identical replacement for a missing or a faulty oil tank cover assembly that was installed on a new unit. The tank holds the oil that is used by the unit, please make sure to check the diagrams of your model for the c...Read moreorrect location and application of this part. Keep in mind this high-quality assembly is made of durable white plastic and is sold individually.

A saw that cuts poorly or leaves fine dust instead of wood chips may need a sharpened or replacement chain. This narrow 10-inch chain is designed for select chainsaws, pole saws, and pruning attachments. Its 40 drive links fit into the guide-bar groove and move around the drive sprocket during operation. Confirm the pitch, gauge, drive-li...Read morenk count, and bar length before ordering. Shut off the tool, remove its battery or spark plug wire, and put on protective gloves before installation. Clean the bar groove, inspect the sprocket, mount the chain in the correct direction, and adjust the tension as directed in the owners manual.

This is a genuine OEM replacement strap made for various yard tools. This fabric strap features one metal lobster clasp, which attaches to the tool via the strap hanger. It is adjustable with a plastic slide adjuster. One strap is included.

This is a genuine OEM sourced replacement part which is designed for use with Homelite and Ryobi handheld pruners. It is utilized to keep the fuel in the tank, over time the material may begin to deteriorate and crack eventually requiring replacement. This high-quality cap is made of durable black plastic and it is sold individually.

This is a genuine OEM sourced part which is specially designed for use with Ryobi handheld pruners. It is an identical replacement for a missing or a faulty intermediate boom assembly that was included with a new unit, please make sure to refer to the appropriate diagrams of your model for the correct application of this component. This b...Read moreoom assembly has a flexible drive shaft inside which rotates the chain. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is an OEM replacement part for pruners and trimmers made by Ryobi and Homelite. The oil pinion gear & plunger go next to the oil pump seal assembly. When replacing this part a screwdriver, a set of pliers, and a socket set might all be required during the installation process. It may become broken and will need to be replaced. This p...Read moreart is available as an individual replacement and is made out of metal and plastic.

This six (6) pin sprocket is an original OEM part. It is compatible with various Ryobi and Homelite pruners and pruner attachments. A sprocket engages the chain of the machine. Sprockets are replaced frequently due to their high wear role. Sold individually.

This is a genuine Ryobi replacement part sourced from the manufacturer. The scabbard is made of flexible black plastic, and is designed to protect the blades of many Ryobi pruner and trimmer devices. No tools are needed, the user can easily slide the scabbard over the blade. This part is sold individually.