RY80588VNM (095079528) Ryobi Pressure Washer - Overview

This detergent suction kit, also known as a soap or chemical injection kit, is designed for use with a pressure washer. This is a genuine OEM part designed to inject soap into the water stream of your pressure washer, and includes the main injector valve, two differently sized O-rings, a spring, and a ball bearing. One end of this kit wil...Read morel be threaded into the washer, and the other will lead to your cleaner with a siphon, which is sold separately. This injection kit would need to be replaced if the nozzle is leaking, the injector fails to work properly, or water is getting into the soap dispenser. To replace, simply unscrew the previous injector and remove it, then fit the small O-ring inside the threaded end of the new injector, along with the ball bearing and then spring. Wrap the larger O-ring around the base of the threaded end, and apply a layer of lubricant, before installing the new injector and securing it.

This is an original part from Ryobi. The wheel is constructed of high-quality plastic, and is compatible with several pressure washers. This component is fitted on the main frame assembly, allowing the operator to easily move the cleaning device when needed. A flat head screwdriver and a mallet may be helpful for the removal and replacement. The wheel is sold individually.

This OEM outlet tube, also known as a hose connector, allows pressurized water to flow from the pump of your pressure washer to the nozzle. Connecting the hose to the handle assembly and the spray wand, it is where the water exits from your machine so you can direct the stream towards a desired surface. You can tell if an outlet tube is b...Read moreroken when it has visible cracks or holes and when water leaks or sprays from the connection points or along the tube. A damaged or blocked tube can result in a loss of pressure and potentially premature wear or machine failure. To remove the outlet tube, use a wrench set to unscrew it from the pump. Please note that this replacement part is sold separately from the pump assembly.

The collar attaches to the spindle. This item is made out of plastic and metal and is sold individually. This is an authentic part from Ryobi and Homelite for use in pressure washers. An allen wrench might be necessary during the installation of this part. It will require replacing if it becomes broken.

This is an authentic manufacturer made replacement part which is specially designed for use with Ryobi pressure washers. The detergent tank cap seals the detergent tank to ensure the soap stays contained as well as keep debris from getting in the tank. The cap is made of plastic and is sold individually. No tools are required for installation, simply screw on the cap firmly to the detergent tank to secure.

It is a genuine OEM item that is made for use with Homelite and Ryobi and Homelite pressure washers. This is a special component which helps to provide a tight fit between connected components. Over time it may wear out or get damaged eventually requiring a replacement. Make sure to check the appropriate diagrams for your model to ensure ...Read morethe proper repair procedure. It is made of durable metal and is sold individually. A wrench might be needed to replace this inlet filter connector.

This is an original part from Homelite. The lock nut (m8 x 1-1/4 mm) is compatible with many pressure washers, and is sold individually. The metal lock nut helps to secure various components of the pressure washer. A wrench, hex key and screwdriver are often needed for the installation.

This is an authentic Ryobi replacement part that has been sourced from the original manufacturer to be used with circular saws. The two wire cord is encased in a durable casing and is used to relay electricity from the outlet to the switch assembly. This cord is available as an individual replacement part.

This manufacturer-approved nut is supplied by the original manufacturer for use with Homelite, Ryobi and Ridgid pressure washers. It is a standard hardware which may have multiple applications. Make sure to refer to the appropriate diagrams for your model to ensure the exact location and the correct application of this part. This high-qua...Read morelity nut is made of durable metal and is sold individually. A wrench will be needed to secure or remove it.