RY80518 Ryobi Pressure Washer - Overview

Thermal Relief Valve

★★★★★

★★★★★

(1)

This thermal release valve is for pressure washers. Thermal release valve attaches to the pump and releases the water and high pressure inside the pump if the water temperature exceeds normal oper...

Outlet Tube This OEM outlet tube, also known as a hose connector, allows pressurized water to flow from the pump of your pressure washer to the nozzle. Connecting the hose to the handle assembly and the spray wan... Add to cart

Inlet Tube This is an authentic OEM part for pressure washers made by Homelite, Ryobi, and Husky. The inlet tube fits onto the pump and is made out of metal. When replacing this part a socket set may be needed. ... Add to cart

Soap Nozzle

★★★★★

★★★★★

(1)

This is an original replacement part designed for the Homelite and Ryobi pressure washers listed below. This is a low pressure nozzle which draws soap/chemical mixture from the detergent tank, and gen... Add to cart

SPARK PLUG (BOSCH WSR6F) Add to cart

Chemical Siphon Tube It is a genuine replacement part that is supplied by original equipment manufacturer for use with Homelite, Ridgid and Ryobi pressure washers. This siphon tube is used to deliver the chemical solution... Add to cart

Spark Plug The spark plug attaches to the cylinder head. This item is an OEM from Homelite and Ryobi for use in generators and pressure washers. This is available as an individual replacement part. A wrench migh... Add to cart

Extension Wand

Lock Nut (m8 X 1-1/4 In) This is a genuine manufacturer-sourced replacement lock nut which is specially produced for use with pressure washers. A lock nut is a type of nut that resists loosening when properly threaded onto a ...

Filter This is a genuine replacement part that has been OEM sourced to be used with pressure washers from Homelite, Ryobi, and Ridgid. The special filter connects to the end of the chemical siphon tube and i... Add to cart

Output Shaft Key (3/16 x 35 mm) Add to cart

Hitch Pin