My Orders
RY13016 Ryobi Trimmer - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No Longer Available
Fuel Tank Assembly
Part #310585012
This OEM sourced replacement fuel tank assembly is designed for use with Ryobi string trimmers. It is made out of plastic and it includes the fuel tank, fuel lines, fuel cap and the fuel filter. Please note the screws used to secure it are sold separately. It is very important to replace the fuel tank if it is cracked or damaged to avoid ...Read moredamage or serious injuries. Make sure to drain the gas tank before starting a repair.
Read less
$7.55
In Stock
Flanged Washer
Part #099078001005
This flanged star washer is a manufacturer-sourced replacement part designed for use trimmers. It is also known as a tooth lock washer due to its serrated inner edge which resembles inward facing teeth. These teeth bite into the head of the fastener and provide a better grip than standard washers. This washer also has a flange on one side...Read more which is a lip that extends past the edge of the washer. It helps to distribute the load of the fastener over a wider area to provide extra stability and a more secure hold. Over time the washer may wear down or become damaged. To remove the washer, first unthread the bolt/screw it is fastened on. Use pliers to grip the washer and gently twist it off. Place the new washer over the fastener with the teeth facing toward the surface being fastened and insert it into the designated hole. Ensure that it is locked into place. Each washer is sold individually.
Read less
$7.12
In Stock
Fuel Filter
Part #300759005
This is a genuine OEM replacement part, it is made out of Metal with Fabric Filter Material. It is sold individually and is used on a variety of Lawn and Garden Equipment. This is an in-tank fuel filter which makes sure that the fuel delivered to the engine is free of any debris or contaminants. It will over time become clogged and restrict the fuel getting to the engine so it will need to be replaced.
No Longer Available
Trimmer String Head Adapter
Part #678019002
Genuine OEM replacement part, this part is sold individually. This part is where the stringhead assembly is mounted on the Trimmers shown below. It attaches to the spindle. The thread mount on the spindle is a left hand thread.
$6.40
In Stock
AIR FILTER
Part #901723001
This is an air filter for a wide range of trimmers. Air filters are designed to prevent dust, dirt and debris from entering the carburetor and clogging and damaging the engine. This air filter is made of foam and comes as an individual OEM part. If you have noticed poor performance from your trimmer, or notice the air filter is missing or...Read more clogged, it needs to be replaced immediately to not only get full functionality from your trimmer, but to avoid damaging any other components. Replacing this air filter is easy and does not require any tools. First, apply a small amount of oil into the air filter so it can catch any and all debris. Then simply disconnect and remove the air filter cover and then replace the air filter inside and reinstall the air filter cover.
Read less
$32.02
In Stock
Gear Head
Part #308210009
This Gear gear head assembly is designed to transfer power from the drive shaft to the cutting head, allowing the string trimmer or brush cutter to operate smoothly and efficiently. Housed in a durable gearcase, it supports reliable rotation and helps maintain consistent cutting performance during use. Replacing a worn or damaged gear hea...Read mored can resolve issues such as loss of power to the cutting head, excessive noise, or erratic operation, restoring dependable performance. A properly functioning gear head also helps reduce strain on the drive system, contributing to longer service life and more efficient trimming results.
Read less
No Longer Available
Air Box Base
Part #308398005
This is an authentic Ryobi replacement air box base that is specially designed for use with string trimmers. It is sourced directly from original equipment manufacturer. The purpose of this item is to secure the air filter which is sold separately. Replacing this part you will need a screwdriver. • Remove the cover • Remove the air...Read more filter • Remove screws that secure the base • Remove the old air box base • Secure the new one in place • Reassemble and test the unit
Read less
$6.40
In Stock
GASKET
Part #570709002
This replacement gasket is an authentic OEM item that is specially designed for Ryobi lawn and garden equipment. This gasket provides an air-tight seal for the oil pan. Over time gaskets tend to shrink, become brittle and crack eventually requiring a replacement. It is made from high quality composite material and it is sold individually.
No Longer Available
Carburetor Assembly
Part #309375002
This carburetor is for line trimmers.
Carburetor mixes air and gas before the fuel mix goes to the engine.
Wear work gloves to protect your hands and work in a well-ventilated area during this repair.
$6.86
In Stock
Clutch
Part #300960002
This is an OEM sourced replacement part used on gas trimmers. A centrifugal clutch is a part that uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. Today's centrifugal clutches will function even when they shouldn't, far beyond the point of when they need to be replaced. Keepin...Read moreg an eye on equipment performance will determine when the centrifugal clutch requires attention. Please note the clutch drum, spacer and washer are all sold separately. This clutch is made out of metal and it is sold individually. To replace this item you would need a screwdriver and pliers.
Read less
$6.40
In Stock
Clamp
Part #PS04420
This is a genuine item that is supplied by the original equipment manufacturer for Ryobi, Toro and Homelite handheld lawn and garden equipment. It is an identical replacement for a missing or damaged string guard clamp that was originally installed on a new unit, please make sure to refer to the owners manual of your model for the correct...Read more application of this component. Keep in mind this high-quality part is made of durable metal and is sold individually.
Read less
$6.40
In Stock
Bolt
Part #660649001
This replacement bolt is sourced from original equipment manufacturer for use with Ryobi string trimmers. It is generally used to secure the spool to the trimmer shaft. This is a hex head bolt which is sold individually. Note, when installing or removing this bolt you would need a wrench.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Choke lever snapped off.
3 of 3 people
found this instruction helpful.
Remove air cleaner cover and filter, remove air box base (2 bolts). Simply reverse order to reinstall. Side notes: 1) The air box itself comes complete with a new filter, so no need to order that separately unless you want some spares. They're only $0.86 each anyway, so you might as well while you're at it. 2) Part was perfect in fit and
... Read more
function. 3) The prices here are so ridiculously low, I don't know how they make any money. I'll most definitely be back!
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!