RY09466A (090153007) Ryobi Leaf Blower / Vacuum - Overview

This authentic OEM starter rope measures 42-inches and is for use with various models of outdoor power equipment. Made of nylon, this rope wraps around the starter recoil spring and when pulled, is used to start the engine. This rope is sold as an individual part, so any necessary grips are sold separately.

This OEM switch is used on a variety of different lawn equipment models and is sold individually. This switch is used to turn your lawn equipment on and off, so if your equipment is either not turning on, or this switch feels loose within its housing, it may be time to replace it. To remove it, separate the two halves of the housing which...Read more it connects to, disconnect the throttle and other wires with pliers, and depress the securing tabs. To install the new switch, click it into place within the housing and connect the appropriate wires to the two terminals, and then reconnect the throttle cable and other wires, and then simply align the two halves of the housing and secure with screws.

This fuel filter is a genuine OEM part that is compatible with various lawn equipment models and is sold as an individual part. Fuel filters are used to remove dirt and debris from fuel entering the carburetor and engine and are made of metal with a fabric filter material, meaning this filter will eventually clog and need to be replaced. ...Read morePlease note that the fuel filter should be inspected regularly, not solely when it is clogged. The filter will be attached to the fuel line within the fuel tank and if your equipment is having starting, revving, or idling issues, the fuel filter may be the reason why. To replace it, simply use a hook to pull the old filter out from the fuel tank, use pliers to remove any clamps attached to the end of the fuel line, and pull the filter off. Attach the new filter to the fuel line, along with the clamp, and set the filter back into the tank.

This is an authentic OEM sourced replacement screw. It is specially manufactured for use with a variety of handheld lawn and garden equipment. This is a standard hardware which has multiple applications based on your unit. Please refer to appropriate diagrams for correct location and application of this screw. This screw is made out of me...Read moretal and it is sold individually. To remove or install it you will need a torx screwdriver.

This replacement ignition module is and authentic part supplied directly from original equipment manufacturer. It is commonly used on Ryobi trimmers/brushcutters and blowers. Ignition module (armature-magneto) is designed to supply electric current to the ignition system by producing continuous pulses of high voltage for the spark plugs. ...Read moreIt is made out of metal with rubber boot. Includes one (1) magneto per order. To complete this repair you would need screwdriver set. • Remove the spark plug boot • Remove the air filter housing • Remove other shrouds/housings • Disconnect ignition wires • Disconnect spark plug boot • Face flywheel magnet to ignition module position • Install new module in place • Reassemble and test the unit

(M4 x 12 mm)

This is an OEM part which is specially made for Ryobi handheld lawn and garden equipment. The check valve connects between the breather hose allowing air into the engine. Over time it may wear out or get damaged eventually requiring a replacement. One durable plastic check valve is included. You may need a screwdriver to perform this repa...Read moreir. Check the appropriate diagrams for your specific model to ensure the exact location and the correct application.

A starter grip, also known as a pull-start handle or recoil grip, is used within a startup system to give the user a comfortable and convenient method of starting their equipment. This starter grip is made of high-quality plastic and attaches to the end of the starter rope for the various makes and models of power equipment that it is com...Read morepatible with. If the handle for your equipment is broken or needs to be replaced, you simply pull and feed the starter rope through the hole in this handle, and then knot the rope on the other side to retain it. This grip does not come with any other part in the starting mechanism, like a starter rope, and is sold as an individual part.

This is an authentic replacement part manufactured for use with Ryobi blowers. The carburetor is used to mix air and fuel to be sent to the engines combustion chamber. Over time carburetors can wear out and cause the engine to have trouble starting or can prevent the engine from running optimally. This carburetor is a complete part assembly and is sold as an individual replacement part.

This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Homelite and Ryobi handheld lawn and garden equipment. It is a standard hardware which has multiple applications based on the model of your tool, please refer to the appropriate diagrams for the correct location and use of this part. It is made of high-quality metal and it is sold individually.