RT65 (2000) Cub Cadet Tiller - Overview

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

This shoulder bolt is supplied directly from the original equipment manufacturer. Constructed of hardened metal, the 1/ 2

The air valve attaches to the wheel and is made of a durable material. This is a genuine MTD, Ryobi, Yard Machines, Bolens, Troy-Bilt, and Yard Man part sourced directly from the manufacturer for use in chippers, shredders, cultivators, edgers, lawn tractors, snowblowers, and trimmers. Keep in mind that this part is sold individually. Whe...Read moren replacing this item a set of pliers might be required during the installation process. It might wear out over time and will need replacing.

This ball bearing is an authentic replacement part used in outdoor power equipment. It has an outer diameter of 1.575 inches and features a retaining ring to secure it in place. It is also double sealed to maintain lubrication and provide additional protection. The ball bearing is responsible for reducing friction between moving parts and...Read more ensuring smooth rotation. If the ball bearing is worn down, damaged or inadequately lubricated, it can result in damage to the equipment parts, overheating, excessive noise, and decreased power during operation. A faulty bearing should be replaced promptly to ensure the longevity of your equipment. Remove the faulty bearing using a bearing puller and clean the mating surface thoroughly. Place the new bearing in position and apply steady pressure using press tools or a bearing installer to secure it in place.

This is an authentic replacement part manufactured for use with garden tillers. The shaft seal is used to seal the connection where the gear shaft connects to the gearbox housing. This shaft seal is sold as an individual replacement part, please see model diagram for associative parts.

This is a genuine OEM sourced replacement part that is intended to be used with lawnmowers, snowthrowers, and tillers from Bolens, Ryobi, Yard Machines, MTD, Troy-Bilt, and Yard-Man. The sealed bearing is used to limit friction between a rotating shaft and a fixed part assembly. It is recommended to review your models illustrated part dia...Read moregram to confirm the bearing\\\'s compatibility. This item is sold as an individual replacement part.

This is an authentic part that is supplied directly from the original equipment manufacturer for Craftsman equipment. The clutch cable connects the clutch control arm to the drive system inside the tiller, allowing you to have fluid control. This part is made is flexible plastic and is sold individually. For this repair you will need a pair of needle nose pliers and a screw driver to aid you.

This heavy-duty tiller drive belt is designed to transfer power reliably within rear-tine tiller drive systems. Reinforced with high-strength aramid fiber cords, it resists stretching and handles demanding soil-working conditions with consistent performance. Built for durability and dependable power delivery, this belt is an ideal replacement for worn or slipping drive belts to help restore smooth tiller operation.