The bake element is located on the bottom of the oven. If your oven will not heat properly it may be due to a faulty or damaged baking element. If you can see that the element has been separated or blistered, you should replace the part immediately. If there is no visible damage, turn the oven on and check to see if the element heats even...Read morely. If the element is not heating evenly, or if it is not heating at all, it will need to be replaced. This element is 19 inches wide x 19 inches long, and has male spade push on terminals.
This broil element is designed for wall ovens and plays a critical role in achieving high-temperature cooking during broil cycles. Positioned at the top of the oven cavity, it delivers intense, direct heat for broiling meats, vegetables, and other dishes. A malfunctioning element may result in the oven failing to reach proper broil temper...Read moreatures, uneven cooking, or complete loss of broil function. Constructed from heat-resistant materials for durability and performance, this replacement part restores optimal cooking capability. Before installation, always disconnect power to the appliance and verify compatibility with your specific oven model.
This metal oven rack provides a stable and durable surface for baking, roasting, and broiling inside your oven. Designed to fit select gas range and oven models, it promotes even heat circulation and airflow around food for consistent cooking results. Constructed from solid 304 stainless steel, the rack resists rust and warping even at hi...Read moregh temperatures, ensuring long-term reliability. Measuring approximately 23.75 inches in length and 16.25 inches in width, it offers ample space for cookware. Many versions feature convenient handles at each end, allowing for easy placement and removal from the oven.
This surface element is designed to deliver heat to a specific cooking area on the top of an electric range, providing consistent and efficient performance for everyday cooking tasks. Positioned beneath the cooktop surface, it plays a key role in maintaining accurate temperature control. For safety, always unplug the range or switch off t...Read morehe appropriate circuit breaker before beginning installation. Wearing protective work gloves is also recommended to prevent injury while handling electrical components.
Replace a worn or malfunctioning burner with this genuine 6-inch electric coil surface element, designed for precise and even heating. Featuring an integrated temperature sensor, it ensures accurate heat regulation for safe and consistent cooking performance. Built to meet modern safety standards, this replacement provides reliable operat...Read moreion and restores your cooktop’s functionality. Installation is simple—disconnect power, remove the old element, and position the new coil securely in place.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lower bake Element would not heat.
229 of 262 peoplefound this instruction helpful.
Ronald from Nassau, NY
Really Easy
Less than 15 mins
Nutdriver, Pliers
First I slid the stove out and unpluged it, then removed two screws,slid out element, disconected two wires, slid new element in to place, pluged two wires in ,put into place and installed two screws, pluged stove back in, and turned on to try. Works perfect.
Was this helpful?
Thank you for voting!
Broken heating element
75 of 93 peoplefound this instruction helpful.
Paul from anna, TX
Really Easy
15 - 30 mins
Nutdriver, Pliers
1)Turn off power to stove 2)remove 2 bolts holding heating element 3)pull element out of the back of the oven about 8" so that the wire connects is visable 4)pull wire clips off of heating element and remove element from the oven 5)put wire clips on the new heating element 6)push new heating element back into the
... Read moreholes in the back of the oven 7)screw botls back into the oven holding the heating element in place 8)Turn power back on
Read less
Was this helpful?
Thank you for voting!
Broiler burnt out.
20 of 24 peoplefound this instruction helpful.
ellen from centennial, CO
Easy
15 - 30 mins
Nutdriver
Removed screws using nut driver. Pulled element way forward until wires came through. Pondered how to detach burned out element from wires. Chickened out, call neighbor who grasped things firmly with two hands and pulled. Old element came loose. Popped in new element. Cursed the screws that wouldn't align with holes to support element; fi
... Read morenally did it. Screwed element plate in place. Put oven door back on, plugged it in and turned it on hoping that we hadn't reversed the wires. Job accomplished.