R8223404 Ridgid Multi-Tool - Overview

Sleeves, also known as tool holders/adapters, are used to allow you to connect other accessories to a multi-tool, holding and securing them in the process. This sleeve has an approximately 3/4-inch outer diameter and 1/4-inch inner diameter/bore and is compatible with different models of multi-tool. Because this part is a high-use part, i...Read moret is recommended that you order multiple to avoid running out in the future. To avoid having to replace it as often, make sure to clean the sleeve after each use and handle it with care. If you notice high wear on the sleeve or have difficulty keeping attachments connected, it likely needs to be replaced. To replace it, you may need an Allen wrench, screwdriver or other tools.

Genuine OEM replacement part, this item is sold individually. The purpose of the 661379002 Screw is to secure the accessories to the output shaft assembly on the tools shown below. It is a Hex Head Screw The part number 6800201 Hex Wrench can be ordered to remove and install the screw.

Genuine OEM replacement part, this item is sold individually. The purpose of the Blade Adapter allows you to use other manufactures blades. It also stabilizes the blade or keeps the blade in one position, keeping it from moving when the tool is being used.

This is a Genuine OEM replacement part used on Multi-Tool Head. This part is made out of Rubber and is sold individually. The purpose of this O-Ring is to provide an air tight seal between the Sleeve and Adapter Blade.

This is an authentic OEM approved replacement part designed for Ridgid JobMax Multi-Tool Head. This is a hook and loop fastener closure system. The rough side is called hook. Its softer mate is called loop. The hooks engage into the loop and provide the closure mechanism. This part is made out of metal with plastic and it is sold individu...Read moreally. Please note screws used to attach it to the sander are sold separately. Changing the pad is easy and will only require a hex key/allen wrench. • First remove the screws that secure the pad • Remove old pad and replace it with the new one • Secure it using the screws

This is an OEM part sourced directly from the manufacturer. The spline shaft assembly is found in multi-tool heads from Ridgid and Ryobi. This part is made of metal, and is used to attach the tool head to the base and transfer power from the motor to the tool head. You may require a screwdriver when replacing this item. The spline shaft assembly is available as an individual replacement part.

This replacement hex key is utilized on Ridgid, Ryobi and Homelite power products. It is a genuine OEM sourced item, it is not an aftermarket imitation. This hex key also known as an allen wrench allows user to tighten and loosen hex socket head screws. This wrench is made from durable metal and it is sold individually.