My Orders
PWL - Overview
Models starting with PWL
Click on the best match to narrow your results.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
No Longer Available
Air Cleaner Element
Part #A100631
This foam air cleaner element helps to keep dirt and debris out of the engine in your lawn equipment. It is sometimes called an air filter element, cartridge, or insert. You can find it near the engine in a housing that lets air into the combustion chamber, where it gets mixed with fuel. This fuel-air mixture produces energy that powers t...Read morehe engine when it is ignited by the spark plug. If the element gets dirty or clogged, you will need to replace it. If you do not replace it, you may notice black smoke coming out of your machine. Your engine will work poorly and might use more gas than it should. To remove your element, refer to your user manual for instructions, as the steps may vary from one model to another. Generally, you need to locate the element housing and remove the screws or clips that hold its cover in place. You can then carefully remove the element from inside. This genuine OEM replacement part is sold individually.
Read less
$110.97
In Stock
Drive Shaft Assembly
Part #A100987
It is a genuine manufacturer-supplied item that is made for use with Powermate, Southland and Airstream lawn edgers. This item provides an identical replacement for a damaged or a missing drive shaft assembly that was installed on a new unit. Check the owner's manual and the diagrams for your model to ensure the correct repair procedure. ...Read moreNote, this high-quality assembly is made of durable metal and is sold individually. A wrench set and pliers might be needed when replacing this component.
Read less
No Longer Available
Bolt
Part #A100628
This is a genuine item that is supplied directly from the original equipment manufacturer for use with lawn and garden equipment. It is an identical replacement for a missing or a faulty bolt that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of th...Read moreis hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.
Read less
$85.53
In Stock
Starter Assembly
Part #A100998
This starter assembly is a recoil mechanism with a pulley, starter rope, handle, guide pan and springs; everything you need to efficiently start your equipment. This starter assembly is designed for and compatible with various models of edgers and is sold as an individual OEM assembly, without any securing hardware like screws. Starter as...Read moresemblies can break, wear out, and eventually need replacing because they are a high-use part, and this can show in areas such as starter ropes breaking or fraying, recoil springs not holding the same level of tension, or if a smaller, more complex component within the assembly is not working properly anymore. If you notice that your edger is not starting easily, has starting issues, or the engine simply no longer cranks ? those are signs that the starter assembly needs replacing. This replacement process is as simple as unscrewing the securing screws from the old starter assembly from the cylinder head part of your edger and securing the new starter assembly in its place.
Read less
$74.32
In Stock
Edger Blade
Part #A100503
This part has been sourced from the original manufacturer to be used with lawn edgers from Powermate and Southland. The metal blade can wear down over time and begin to shred the lawn. If the blade wears down it will need to be replaced to maintain clean edges around the lawn. This blade is available as an individual replacement part.
$8.85
Special Order
Air Cleaner Housing
Part #A100630
This housing is what directly connects the rest of the air filter housing to the equipment. This genuine OEM part is made of high-quality plastic and is compatible with several different models of edgers, but the hardware to fasten this housing to your equipment is sold separately. If there are any cracks or the fit and seal for the air f...Read moreilter housing is not tight enough, the housing will need to be replaced because it seals dust, dirt, and debris from entering your equipment, ensuring better health and performance. The cleaner your air filter, the better and longer your equipment will run and stay running, without need for costlier repairs. This housing is typically fastened to the side of the engine but consult with the user manual for your model for the appropriate installation location.
Read less
$66.39
Special Order
Edger Belt
Part #A100493
This is a genuine OEM replacement part specifically designed for lawn edgers. The belt, made of rubber, has a length of 56 inches and a width of 1/2 inch. Note that your previous belt may appear longer than this due to stretching and wear over time. Its primary function is to connect the motor to the blade, enabling the blade to spin and ...Read moreefficiently cut grass. If you notice signs of fraying, tearing, or hear squeaking and grinding noises while operating the edger, it indicates that the belt is no longer functioning as it should and should be replaced. When removing the damaged belt, take note of how it is threaded around the pulleys to ensure that you install it the correct way. The belt is crucial to the performance of the edger; therefore, it is important to regularly inspect the belt and replace it when necessary.
Read less
No Longer Available
Drive Shaft
Part #A100500
This drive shaft is designed to transfer power smoothly and reliably within lawn edgers, supporting clean, consistent edging performance. Made from durable metal, it helps maintain proper operation when replacing a worn, bent, or damaged shaft. Ideal for routine repair or maintenance, it restores dependable power delivery and overall tool performance in 4-cycle edging equipment.
$9.32
In Stock
Cover Assembly, Air Cleaner
Part #A100982
This is a Powermate, Southland, and Airstream replacement part directly sourced from the manufacturer for use in edgers. The air cleaner cover goes next to the air cleaner element. It might require a screwdriver and a socket set to replace this item. It will need to be replaced if it breaks. This part is made of a durable material and is available individually.
$5.98
Special Order
Air Cleaner Gasket
Part #A100627
This OEM-approved air cleaner gasket creates a seal between the air cleaner housing and the carburetor in your lawn and garden equipment. It makes sure that only clean air enters the engine for combustion. Over time, the gasket wears out. It may appear cracked, flattened, or distorted. You need to replace a damaged gasket. Otherwise, air ...Read moreleaks can happen, and debris and contaminants can enter the engine. This leads to reduced engine efficiency, rough running, and even engine stalling. If you are replacing your gasket, remove the spark plug first. You then need to access the air cleaner housing by removing its cover with a screwdriver. You can then peel off the gasket from the housing. This replacement part is sold individually.
Read less
$9.54
In Stock
Hose, Fuel
Part #A100625
It is a genuine item that is supplied by the original equipment manufacturer for use with lawn edgers. This is an identical replacement for a missing or a faulty hose that is utilized to deliver the fuel. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in...Read more mind this high-quality part is made of durable rubber and is sold individually. Note, the #A100624 Clamp, Fuel Line is sold separately.
Read less
$83.54
In Stock
Fuel Tank
Part #A202711
This fuel tank is an authentic replacement part sourced directly from the original equipment manufacturer. It is compatible with a variety of models and brands of lawn edgers. This tank is designed to contain the fuel needed to power the machinery. It should be replaced if it is damaged or there is rust inside. To replace it, you must emp...Read morety the fuel from the tank. Remove the fuel line by undoing the bolts securing it using a socket set. Install the tank and secure the fuel line again. NOTE: The fuel cap, part number A100622 only fits the older version of the tank, part number A100783. Part number A202712 fuel cap will fit this newer tank.
Read less
Common Symptoms of models starting with PWL
How this model fails, and the parts that fix it.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
edger will not run longer than 1 minute
6 of 29 people
found this instruction helpful.
I replaced the carburetor, air filter, cleaned out the gas tan and replaced the fuel line and filter. As a last resort I replaced the gas cap and gas still will not flow from the gas tank to the carburetor. I have worked on engines of all sizes over the years and this one has me stumped.....by the way I am 71 years old:) If anyone has an
... Read more
idea please le me know.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!