PW27 - Overview

Models starting with PW27

Click on the best match to narrow your results.

Parts for models starting with PW27

$35.15

Chemical Injection Kit

★★★★★

(3)

Part #192914GS

Used to connect the hose that supplies the chemical cleaning solution (soap), this OEM replacement Chemical Injection Kit consists of the brass fittings, a metal ball, a spring, and a rubber seal, and is an exact replacement for various pressure washers. If the cleaning solution will not dispense, it is possible that you need a new Chemi...Read more

Read less

SVC-RUBBER BUMPER SNAP IN;83578,DTCT304G

★★★★★

(1)

Part #DE81-05442A

$6.55

Screw Wafer

Part #DE81-02250A

$6.57

Garden Hose Filter

Part #B2384GS

This filter, also known as a water inlet screen, is designed for use with pressure washers and has a 1-inch diameter (including the surrounding rubber housing). The filter itself is made of mesh and is sold as an individual part that filters dirt and debris from entering your pressure washer. It is recommended that this part is routinely ...Read more

Read less

$6.55

SVC-SCREW PHIL WAFER;83263,#8X3/8,DCT305

Part #DE81-02331A

$29.39

Timer Temperature Control Knob

Part #DE81-03435A

$10.83

Mount, Vibration

Part #21217GS

This is a genuine replacement part that has been sourced from the original manufacturer to be used with generators and pressure washers from Briggs & Stratton and Snapper. The vibration mount fits between the engine and the frame assembly and is used to reduce vibration between the motor and frame. This item is sold as an individual replacement part.

$6.40

Grommet

Part #30809GS

This replacement part is used on the base of various models of pressure washers to reduce vibration from the pump. This Grommet has an O.D. of 1 inch, is not part of a kit or assembly, is sold individually, and is made of durable black rubber. This part is known to wear with regular use of your machine, it should be replaced if you noti...Read more

Read less

$61.30

Wand-qc

★★★★★

(1)

Part #706595

This is an authentic OEM part for use with Craftsman Pressure Washers. The quick connector also is known as the wand connects to the spray gun handle and houses the nozzle that directs the spray stream. The most common reason for replacing the wand is if it is leaking or damaged. This part is sold individually. The tool that you will need to replace the wand is Silicone grease (optional).

$10.39

18oz 30w 4 Cycle Oil

Part #100005

This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This detergent oil is warranty approved and specially compounded for warm weather use. Please note: it is important to avoid over filling your engine with oil.

SVC-TIMER;72889,EW27SCH

Part #DE81-10426A

$9.02

Vibe Mount, With Washer

Part #191413GS

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton generators and pressure washers. The purpose of this component is to reduce the vibration of a working unit, unfortunately, over time it may begin to fail eventually requiring a replacement. Please make sure to refer to...Read more

Read less

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

The copper fitting on the chemical injection broke.

12 of 17 people found this instruction helpful.

Carl from ARCADIA, FL
Very Easy
30 - 60 mins
Nutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set

I order the part from this site and received it within a week. the only problem was that spring was missing out of the sealed bag. NO PROBLEM!!! I cut a ball point pen spring to fit and everything works just fine. You just have to remember to put the spring in first, then the ball bearing and then the rubber o-ring.If you put them in back ... Read more

Read less

Was this helpful?

Two striped out screw heads

3 of 10 people found this instruction helpful.

David from MCKINNEY, TX
Easy
Less than 15 mins

Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.

Was this helpful?