This is the replacement charcoal filter for your microwave. It is silver and black in color and measures approximately 10 inches by 2 ½ inches. The charcoal filter removes cooking odors from the air that circulates through the microwave vent. You will likely need to replace the charcoal filter if you notice any damage to it, or if it has...Read more been in your microwave for a long time. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
This is a genuine replacement 40 watt bulb for a microwave. The bulb is meant to light up the underside of the microwave or inside of your microwave when the door is open or during use. If your bulb is not illuminating, you may need to replace it. If the bulb is shattered, be sure to use protective gloves during replacement. Always unplug...Read more your microwave before completing any repairs. We suggest ordering a spare, as this is a common wear part.
This light socket is for your microwave and is designed to hold the light bulb. If the light bulb is not working, and the bulb has not burned out, it may be a problem with the light socket. This part is an authentic OEM part sourced directly from the manufacturer. Be sure to disconnect power from the microwave, and consult the manual for your microwave before you make this repair.
This fast-blow glass fuse is a genuine replacement component designed to protect microwave ovens from electrical damage caused by power surges or internal malfunctions. Rated at 20 amps and 125 volts, it interrupts the power supply when excessive current is detected, helping to safeguard sensitive internal components. Measuring approximat...Read moreely 6x30mm (0.24 x 1.18 inches), this fuse is compatible with a wide range of microwave models from GE, Hotpoint, and Frigidaire. Replacing a blown fuse is a common repair when a microwave fails to power on or experiences intermittent electrical issues. Always confirm compatibility with your specific model before installation.
This fan thermostat monitors temperature and activates the cooling fan when heat levels rise, helping protect internal components. Replacement is recommended when the fan does not turn on or temperature regulation becomes unreliable.
Uneven tray movement or loud rattling can be caused by a cracked roller ring or a wheel that no longer turns. The ring supports the glass tray and helps it rotate smoothly during cooking. First remove food buildup and check the tray, center drive piece, and oven floor for damage. Match the replacement to the full appliance model because r...Read moreing size and wheel position can vary. Disconnect power before inspection and handle the glass tray with care. Set every wheel flat in its guide, then turn the tray by hand to check its movement.
This door interlock switch is a safety-critical component designed for use in select microwave ovens. It prevents the appliance from operating when the door is open, ensuring safe and compliant functionality. Engineered to replace previous versions, this OEM part restores proper interlock performance and supports reliable operation. Insta...Read morellation requires disconnecting the microwave from its power source to avoid electrical hazards. Once installed, the switch helps maintain safe usage by ensuring the microwave only activates when the door is securely closed.
Introducing the Microwave Vent Grille Assembly from GE. This essential component serves a dual function - it not only conceals the internal mechanisms of your microwave but it allows for a constant flow of air through its slats for optimal functioning. Its assembly could potentially consist of multiple parts. Please refer to your microwav...Read moree's parts diagram for a comprehensive break-down of included parts. Prior to installation, ensure your microwave is unplugged and don protective work gloves for safe handling. Trust in the reliability and expertise of GE for all your appliance repair needs.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patricia - For model number PVM9005EJ3ES
April 28, 2023
The plastic on the door below the electronics push pad is all cracked. Is there a way to replace the plastic or the door?
Hi Patricia,
Thank you for your question. The part number for the door assembly is PS12296789. We hope this helps!
$254.28
Special Order
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Wade - For model number PVM9005EJ3ES
September 1, 2021
I have had this model for two years and all the sudden when I try and start it the fuse trips. I reset the it at the box and it comes back on but hit start it does it again. Suggestion?
Hello Wade, Thank you for the question. This is normally an indication one or more Doro Switches are defective and may need to be replaced. We suggest testing the switches to check for continuity. We hope this helps!
Cannot get the lights under the microwave to work after a power outage. I have unplugged it then plugged back in and went thru the settings menu. Chef connect does not find range.
Hello Richard, Thank you for the question. The Power surge could have shorted the bulbs and burnt them out and may need to be replaced, PartSelect Number PS8767095. We hope this helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
bulb burned out under the microwave that lights the cooktop underneath
32 of 63 peoplefound this instruction helpful.
Margaret from TOANO, VA
Easy
Less than 15 mins
Screw drivers
got a screwdriver and opened the glass door over the light bulb - changed the bulb and put the glass door back with the screwdriver.
Was this helpful?
Thank you for voting!
Had to replace charcoal filter
15 of 25 peoplefound this instruction helpful.
Jared from SIERRA VISTA, AZ
Easy
15 - 30 mins
Open the front cover by pushing it at the top (where it says “Push”), lifting up and pushing back on top edge of the old filter. Pull it out. Installing the new one is basically just the reverse of those steps! That simple.
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimen
... Read moresions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
Read less
Was this helpful?
Thank you for voting!
Thermal Fuse out
5 of 5 peoplefound this instruction helpful.
Jorge from PANORAMA CITY, CA
A Bit Difficult
30 - 60 mins
Screw drivers
There are videos on YouTube on how to do this but there are a couple of things I’m going to recommend. Color code your plugs when you take the main control panel off, be patient when removing the screws on the thermal fuse use a 45 degree screwdriver but replace the screws with a small hex head self tapper screw for next time. The differ
... Read moreence between these two lookalike fuses is that one is for the fan and the other one is the thermal there’s a price difference and volts so read the back of the bad fuse. These guys are great man and thank you for helping me out.
My Orders
