This halogen light bulb is a genuine OEM component designed for top-mounted lighting in wall ovens and ranges. Operating at 120 volts and 40 watts, it emits a clear, warm white light (approximately 2700K) to illuminate the oven cavity during cooking. The G9 base features two looped pins spaced 9mm apart, ensuring a secure fit in high-heat...Read more environments. Built to withstand elevated temperatures, this bulb enhances visibility inside the oven without compromising performance. Installation should be done with the power off, and the bulb should not be handled with bare hands to prevent damage. Always verify compatibility before purchasing.
This blower motor, also known as the fan blower is supplied directly by the manufacturer for use in ovens. It is responsible for circulating hot air within the oven cavity. The blower motor helps distribute heat evenly, ensuring consistent cooking temperatures and reducing hot spots. This helps to ensure that your baking, roasting, and ot...Read moreher cooking processes run smoothly. The blower motor is typically located behind the rear panel of the oven. If the blower motor is faulty, you may notice uneven cooking, unusual noises like rattling or squealing, and error codes. This part is commonly associated with the F96 error code.
This convection motor kit drives air circulation within the cooking cavity to promote even temperatures and consistent cooking results. Replacement is recommended when airflow weakens, noise increases, or convection performance declines.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Blower Fan quit working
20 of 22 peoplefound this instruction helpful.
Thomas from Goshen, IN
Easy
30 - 60 mins
Nutdriver, Socket set
It took a while to remove approx 30 screws to get to the blower. So my oven was sitting, torn apart while I waited on the new blower fan that I had ordered. It arrived shortly, about 5 days. When I opened the box I saw that PARTSELECT had sent me a drain pump instead of the blower fan that I had ordered. Since an oven does not require a d
... Read morerain pump and it wouldn't work to replace my broken blower fan I had to return it. I was told that I needed to send the part back in order to get a refund. After I sent their drain pump back at a cost of $13 they emailed me and said I didn't need to send the drain pump back. And they refunded me minus shipping So I had to pay shipping both ways for a part that was wrong. And I ordered it from someone else. I put the new blower fan that I had bought from another company in and replaced the 30 screws. And the oven has been working fine ever since. Thank you PARTSELECT for allowing me to tell people how you operate. They have a money back guarantee, but they don't give you back ALL your money. Thanks Again.
Read less
Was this helpful?
Thank you for voting!
A burnt out bulb
12 of 20 peoplefound this instruction helpful.
George from PALM COAST, FL
Really Easy
Less than 15 mins
Screw drivers
After opening the Oven door, I removed the glass cover to view and locate the bulb, at the inside, top front of the Oven. Removed the burnt out bulb by pulling it in a forward motion towards the front of the Oven, slid the new bulb into place and the Oven is again functional.
Was this helpful?
Thank you for voting!
Clear Error Code F96
7 of 8 peoplefound this instruction helpful.
Salih A. Hindas / DHA from SPRNGFLD GDNS, NY
Really Easy
30 - 60 mins
Nutdriver, Screw drivers
Changed Fan Blower only, which cleared the Error Code F96. Other parts have been kept as spares.