PS80903B Homelite Pressure Washer - Overview

This detergent suction kit, also known as a soap or chemical injection kit, is designed for use with a pressure washer. This is a genuine OEM part designed to inject soap into the water stream of your pressure washer, and includes the main injector valve, two differently sized O-rings, a spring, and a ball bearing. One end of this kit wil...Read morel be threaded into the washer, and the other will lead to your cleaner with a siphon, which is sold separately. This injection kit would need to be replaced if the nozzle is leaking, the injector fails to work properly, or water is getting into the soap dispenser. To replace, simply unscrew the previous injector and remove it, then fit the small O-ring inside the threaded end of the new injector, along with the ball bearing and then spring. Wrap the larger O-ring around the base of the threaded end, and apply a layer of lubricant, before installing the new injector and securing it.

This thermal release valve is for pressure washers. Thermal release valve attaches to the pump and releases the water and high pressure inside the pump if the water temperature exceeds normal operating temperatures. Wear work gloves to protect your hands when installing this part.

(25 ft., 3000 psi) This water hose is for pressure washers. Water hose carries water from the pump to the spray wand. Wear work gloves to protect your hands when installing this part.

It is a genuine replacement part that is supplied by original equipment manufacturer for use with Homelite, Ridgid and Ryobi pressure washers. This siphon tube is used to deliver the chemical solution from the tank to the pump. Over time the tube may develop cracks allowing for leaks, if this happens this part can easily be replaced. It is made of durable flexible rubber material and it is sold individually.

This is a manufacturer-sourced component which is designed for use with Homelite pressure washers. The purpose of the pump is to produce pressure in the air tank. Over time it may wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality pump is sold individually. To ensure the correct installation, che...Read moreck the appropriate diagrams of your model. You will need a wrench set to remove the old one and connect the new one. Make sure to drain the air from the tank before starting this repair.

This is an authentic OEM quick connect nozzle, guaranteed compatible with the Ryobi and Homelite machines listed below. This is a standard green pressure washer tip with a twenty-five (25) degree spray width. It is a nozzle used for regular cleaning duties such as removing dirt from decks or cars, and works very well with soap/detergents...Read more. It is one step more powerful than the white forty degree tip (the least powerful of the quick change nozzles). This is a commonly used nozzle so a backup would come in handy. Sold individually.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Homelite pressure washers. The cap allows air into the unit, unfortunately, over time it may wear out, get damaged or simply lost eventually requiring a replacement. Please make sure to check the appropriate diagrams of your model for t...Read morehe correct location and application of this component. Keep in mind this high-quality vent cap is sold individually.

This is a genuine manufacturer-sourced replacement lock nut which is specially produced for use with pressure washers. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt, please make sure to check appropriate diagrams of your model for the correct location and use of this hardware. Not this high-quality component is made of durable metal and it is sold individually.