PS80517 Homelite Pressure Washer - Overview

This thermal release valve is for pressure washers. Thermal release valve attaches to the pump and releases the water and high pressure inside the pump if the water temperature exceeds normal operating temperatures. Wear work gloves to protect your hands when installing this part.

(25 ft., 3000 psi) This water hose is for pressure washers. Water hose carries water from the pump to the spray wand. Wear work gloves to protect your hands when installing this part.

This is an original replacement part designed for the Homelite and Ryobi pressure washers listed below. This is a low pressure nozzle which draws soap/chemical mixture from the detergent tank, and gently spray a light coat onto a surface for cleaning. This soap nozzle may also be called a chemical injector tip. One (1) nozzle is included.

It is a genuine replacement part that is supplied by original equipment manufacturer for use with Homelite, Ridgid and Ryobi pressure washers. This siphon tube is used to deliver the chemical solution from the tank to the pump. Over time the tube may develop cracks allowing for leaks, if this happens this part can easily be replaced. It is made of durable flexible rubber material and it is sold individually.

The spark plug attaches to the cylinder head. This item is an OEM from Homelite and Ryobi for use in generators and pressure washers. This is available as an individual replacement part. A wrench might be needed during the installation process. It is made of metal and will require replacing if it breaks.

This is an authentic Ryobi replacement part that has been sourced from the original manufacturer to be used with circular saws. The two wire cord is encased in a durable casing and is used to relay electricity from the outlet to the switch assembly. This cord is available as an individual replacement part.

This is a genuine manufacturer-sourced replacement lock nut which is specially produced for use with pressure washers. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt, please make sure to check appropriate diagrams of your model for the correct location and use of this hardware. Not this high-quality component is made of durable metal and it is sold individually.

This is a genuine replacement part that has been OEM sourced to be used with pressure washers from Homelite, Ryobi, and Ridgid. The special filter connects to the end of the chemical siphon tube and is used to prevent dirt from entering the pump. This item is available as an individual replacement part.