My Orders
PPT-300ES (E06637001001-E06637999999) Echo Pole Saw - Overview
Diagrams for PPT-300ES
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$6.88
In Stock
Purge Bulb
Part #12318140630
The Primer Pump, aka the Pump Bulb, is a clear, individually sold, plastic part, sourced from the original equipment manufacturer. It has an Outer Diameter of 0.616 Inches, 15.66mm and is 0.558 Inches and 14.19mm in height. This part is used to pump fuel from the tank to the carburator and is rated Easy to install.
This part installs on...Read moreto the primer assembly. If the part dries out or starts leaking that means it is broken (likely due to fatigue or general wear) and must be replaced. Check the model number to ensure you are choosing the right part.
Read less
$10.97
In Stock
Leaf Blower Fuel Tank Vent
Part #A356000031
This a a genuine OEM replacement check valve for your small engine. It is also known as a fuel tank vent. You may need to replace this part if you are noticing debris or dirty oil in the reservoir. Make sure the engine is cool before you begin this repair, and remove the wire and boot from the spark plug to prevent the engine from starting up.
$6.06
In Stock
Trimmer Clip
Part #13201309820
This genuine fuel clip is a silver, metal, individually sold part. It can be installed with pliers and is rated as Easy to install by customers.
This part attaches to the fuel filter to secure the fuel line ot the fuel filter. If broken, likely due to fatigue, there may be a fuel leak. If damaged or missing, the part should be replaced. ...Read moreRefer to your owners manual or model number to ensure you are choosing the correct part.
Read less
$6.40
In Stock
Trimmer Flange Nut
Part #43301903933
This is a genuine OEM replacement part, it is sold individually. It is used in various places on the models shown below.. It is mainly use to secure parts such as Guide Bar Covers, Sprocket Guards etc.
$6.40
In Stock
Spark Arrester Screen
Part #14586240630
Also referred to as a Spark Arrester, this Spark Arrester Screen is an authentic OEM replacement part that is not part of a kit or assembly. It is made of metal and sold individually. The purpose of this screen is to prevent flammable debris from entering the engine and becomes worn through regular use. If the screen is clogged, remove th...Read moree screen from the muffler, hold it with pliers, and use a torch to burn off the debris before reinstalling the screen.
This part needs to be replaced when it becomes damaged or worn. When the screen is malfunctioning, you may notice debris exiting through the muffler. To complete this repair, you will need a screwdriver and pliers. This screen is located within the muffler; refer to your owner's manual for the exact location on your model.
Customers rated this repair as Easy.
Read less
$12.30
In Stock
Air Filter
Part #A226000473
This is an original Echo replacement part. The single layer air filter is designed by the manufacturer for use in power pruners and blowers. This part is made of mesh in a plastic frame, and is used in the air cleaner assembly to help remove dust and debris from the air that passes into the carburetor. No tools are required when replac...Read moreing this item. Simply loosen the cover knob so the cover can be removed. The old filter can then be removed and replaced. This product is sold individually.
Read less
$6.40
In Stock
Chainsaw Chain Tensioner
Part #C309000030
This is an Authentic Part sourced from Original Manufacturer. This part is made out of Metal and it is Sold Individually. If the chainsaw bar doesn't adjust when you turn the tension screw usually the tension gear/pin or the adjustment bolt is worn or damaged.
$6.06
In Stock
Fuel Line Clip
Part #V490001230
Used in over 150 models of outdoor power equipment, this clip is commonly used to clip fuel lines or other hoses/tubes in place. It is sold individually, not as part of a kit or assembly, made of metal, and is silver in color.
When this clip becomes damaged or worn, it can no longer support the fuel line, which may cause a fuel leak and...Read more/or smell. This wear will occur as part of regular use of your equipment. To complete this repair, you will need a wrench, screwdriver, and pliers. It is found in a variety of locations depending on your model; please refer to your owners manual for the exact location.
Customers rated this repair as Easy.
Read less
$7.12
In Stock
Sprocket-drive
Part #C580000070
This drive sprocket is made of high-quality metal and is designed for use with various makes and models of pruner, pole saw and trimmer. This sprocket is sold as an individual part and features 6 teeth/pins and a 3/8-inch pitch, which correlates to the distance between 3 consecutive rivets divided by two. If the chain for your equipment i...Read mores slipping or if the sprocket is worn down and worsening performance, the sprocket will need to be replaced immediately. Sprockets wear down easily because they are a high wear part, and thus will need to be replaced frequently, so it is recommended that you always have this part on hand since your equipment will not run as required without it.
Read less
$6.06
In Stock
Trimmer Nut
Part #90050000005
This OEM nut is a 5mm, gold, metal nut, which is sold individually. It can be installed with a Wrench or Socket and Torque Wrench by torquing to the manufacturer specifications. This nut is used to secure another part in place, and should be replaced if damaged due to fatigue (such as damaged threads or rounded ends).
This nut can have v...Read morearious uses on various equipment, and as such the difficulty of the installation can vary, but generally this is an easy repair.
Read less
$6.40
In Stock
Trimmer Spark Plug Coil
Part #15901103432
This spark plug wire, also known as a spark plug coil or spark plug cap coil, is compatible with various makes and models of hand-held outdoor power equipment and is sold individually. This wire is installed within the spark plug boot and attaches to the spark plug for the ignition of your equipment. The spark plug wire is often exposed t...Read moreo extreme heat and excessive vibrations, so through normal wear and tear, it will likely break down. If your equipment is having difficulty starting or has general performance issues, the wire may be the reason why. To replace this wire, make sure your equipment is off before removing the wire and boot from the spark plug. Remove the boot from the wire and install the new wire within the boot before re-installing the boot back to the spark plug.
Read less
$6.40
In Stock
Outer Socket
Part #C509000100
This OEM socket-outer is specifically designed for use with Echo handheld pruners. It connects to the drive shaft, enabling rotation of the trimmer head. Made from durable plastic, this high-quality component is sold individually and should be replaced if it becomes worn, cracked, or damaged over time. The inner socket is sold separately....Read more Replacing the socket-outer is a straightforward process that typically requires only a screwdriver and a wrench to disassemble and reassemble the main pipe housing the drive shaft. For proper installation and application, refer to your model’s owner’s manual and diagrams.
Read less
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More