Models
>
PPT-2100
PPT-2100 (Type 1E) Echo Trimmer - Overview
Sections of the PPT-2100
[Viewing 8 of 8]_WW_8.gif&Position=1&mfg=Echo&Type=Trimmer&Mark=1 "Carburetor Diagram and Parts List for Type 1E Echo Trimmer")
_WW_1.gif&Position=2&mfg=Echo&Type=Trimmer&Mark=2 "Engine, Short Block, Ignition, Cylinder Cover Diagram and Parts List for Type 1E Echo Trimmer")
_WW_2.gif&Position=3&mfg=Echo&Type=Trimmer&Mark=3 "Fancase, Clutch, Starter , Fuel System Diagram and Parts List for Type 1E Echo Trimmer")
_WW_7.gif&Position=4&mfg=Echo&Type=Trimmer&Mark=4 "Gear Case, Auto-Oiler, Guide Bar, Chain Diagram and Parts List for Type 1E Echo Trimmer")
_WW_6.gif&Position=5&mfg=Echo&Type=Trimmer&Mark=5 "Gear Case, Auto-Oiler, Guide Bar, Chain Diagram and Parts List for Type 1E Echo Trimmer")
_WW_4.gif&Position=6&mfg=Echo&Type=Trimmer&Mark=6 "Handle, Stop Switch, Throttle Cable, Driveshaft Diagram and Parts List for Type 1E Echo Trimmer")
_WW_3.gif&Position=7&mfg=Echo&Type=Trimmer&Mark=7 "Intake, Exhaust Diagram and Parts List for Type 1E Echo Trimmer")
_WW_5.gif&Position=8&mfg=Echo&Type=Trimmer&Mark=8 "Upper Pipe, Upper Drive Shaft, Tools Diagram and Parts List for Type 1E Echo Trimmer")
Keep searches simple, eg. "belt" or "pump".
Fuel Line Grommet
PartSelect #: PS8859978
Manufacturer #: 13211546730
This fuel line grommet is compatible with several types of outdoor power equipment. The fuel line grommet creates a seal where the fuel line enters and exits the fuel tank. It is made of black rubber ...
$2.99
In Stock
Air Filter
PartSelect #: PS9195232
Manufacturer #: A226001410
This part is the replacement air filter for your small engine, used for outdoor power equipment. It has a black plastic rim that is approximately 2.5 inches by 2.5 inches. The air filter in your small...
$6.49
In Stock
Fuel Filter
PartSelect #: PS11826311
Manufacturer #: A369000480
This OEM Fuel Filter is a silver and white, steel/felt, part measuring about 1.25 inches in length and 3/4 inch wide. It can be installed with pliers and is rated as Easy to install by customers.
Th...
$4.91
In Stock
Primer
PartSelect #: PS11826485
Manufacturer #: P005003120
This Primer Bulb is a clear, plastic, individually sold part with an Outer Diameter of 0.720 inches (18.30 mm) and a Height of 0.674 inches (17.12 mm). With Flange: 0.842" (21.40 mm). This part is rat...
$6.03
In Stock
Vent Tube
PartSelect #: PS9322952
Manufacturer #: V471001200
This is the replacement vent tube for your outdoor power equipment. It is made of black plastic and is approximately 3 inches long and ¼ inch thick. The vent tube allows air into the fuel tank so that...
No Longer Available
Fuel Tank Vent
PartSelect #: PS9183121
Manufacturer #: A356000031
This a a genuine OEM replacement check valve for your small engine. It is also known as a fuel tank vent. You may need to replace this part if you are noticing debris or dirty oil in the reservoir. Ma...
$6.99
On Order
Fuel Return Tube 3x6x90mm
PartSelect #: PS8862036
Manufacturer #: 13201056330
The fuel return tube or fuel return line, as it is also known, delivers fuel back to the tank from the primer bulb. This is a genuine OEM part from the manufacturer, and it is yellow in color and sold...
$3.99
In Stock
Clip
PartSelect #: PS9261895
Manufacturer #: 13201309820
This genuine fuel clip is a silver, metal, individually sold part. It can be installed with pliers and is rated as Easy to install by customers.
This part attaches to the fuel filter to secure the fu...
$3.99
In Stock
Wing Bolt
PartSelect #: PS8917824
Manufacturer #: 21041752730
The Wing Bolt is a gold, metal bolt, sold individually. It is rated as "Easy" to install, and requires no special tools. This part secures the air filter cover and air filter to the air cleaner case, ...
$3.99
In Stock
Questions And Answers for PPT-2100
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Upper driveshaft adapter replacement
1. Pull out cone shaped adapter piece (tap out or use pliers). 2. Pull out internal adapter from inside shaft by screwing in an 8MM hex bolt. Once bolt is firmly screwed in, pull or tap out. 3. Install new internal adapter into shaft. Ensure the machined end of the adapter is inserted first. Machined end will have smoother internal grooves when viewing from the end. 4. Install/tap on cone shaped adapter until it bottoms.
Parts Used:
-
David from West Greenwich, RI
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Couldn't get 'er done with y'all
Had to order from https://www.jackssmallengines.com/ just to get the correct parts we were needing. That's what we get ordering from Canada.
Parts Used:
-
Wayne from EASTLAND, TX
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
