This replacement haliant surface element is designed for use with flat-top ranges and cooktops, positioned beneath the glass surface to supply consistent heat to the cooking area. Measuring approximately 12 inches in diameter, it provides reliable performance for a variety of cooking tasks. If the burner fails to light when activated, the...Read more surface element may be faulty and require replacement. Installation involves disconnecting power to the appliance, removing the screws securing the cooktop, lifting the glass surface, and replacing the element by disconnecting the wires and securing the new unit in place. This component is sold individually and is compatible with select models of electric ranges and cooktops.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
9in portion of heating element inoperable
20 of 28 peoplefound this instruction helpful.
John from LEWES, DE
Easy
30 - 60 mins
Nutdriver, Pliers
first ,troubleshot switch--it was ok. next,troubleshot triple element & found that the 9in portion had an open in the heating element itself ordered .new element,installed it .Works like new!
Was this helpful?
Thank you for voting!
Center Burner of a triple element wasn't working
10 of 13 peoplefound this instruction helpful.
Richard from WOODLAND, WA
Very Easy
15 - 30 mins
Screw drivers
Been procrastinating putting in the new element but decided to do it yesterday even if it meant eating breakfast out. Twenty minutes after starting , breakfast was cooking, at home on the new element. Two screws out, switch wires, snap on retainers, replace two screws and you're done!
Was this helpful?
Thank you for voting!
Needed to replace 12 in heating element
3 of 3 peoplefound this instruction helpful.
Steve from ELMONT, NY
Very Easy
Less than 15 mins
Screw drivers, Socket set
Took a picture of the old heating element to make sure that when I replaced the new element the wires were in the exact location as before.