PLEB30T9FCC Frigidaire Wall Oven Parts & Repair Help | PartSelect
Quick Question!

Have you ever purchased from PartSelect.com before?

Models > PLEB30T9FCC

PLEB30T9FCC Frigidaire Wall Oven - Overview

Get Parts and Repair Help for PLEB30T9FCC

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(2)
PartSelect #:PS2332756
Manufacturer #:316538901
$9.53
On Order
(3)
PartSelect #:PS820208
Manufacturer #:316217002
The oven temperature sensor for your range may also be called a probe. The quick connect on this part may differ than your original piece. If the temperature sensor does not fit yo...
$31.91
In Stock
(5)
PartSelect #:PS471605
Manufacturer #:5304409888
Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryer...
$4.47
In Stock
PartSelect #:PS2345318
Manufacturer #:318024747
This hinge is located on each side of the oven door.
No Longer Available
(2)
PartSelect #:PS2349721
Manufacturer #:318406100
The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to...
$23.67
On Order
(1)
PartSelect #:PS439086
Manufacturer #:316117500
This inner oven door glass, also called an oven heat barrier glass, is a transparent and heat resistant sheet of glass that fits into your oven or range. While containing the heat,...
$113.84
On Order
(2)
PartSelect #:PS3506411
Manufacturer #:318255605
This broil element is found on the roof of the oven and heats food. The most common reasons you would need to replace this part is due to the oven not giving off enough heat, not t...
$53.36
On Order
PartSelect #:PS436497
Manufacturer #:316008401
This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter ...
$5.43
In Stock
(2)
PartSelect #:PS9864838
Manufacturer #:5304494997
This includes pan and insert.
$43.39
In Stock
(3)
PartSelect #:PS1992188
Manufacturer #:318254906
This bake element is found on the bottom of the oven.
$116.60
In Stock
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven not heating to desired temperature

Temperature Sensor – Part Number: 316217002
  • Customer: Dan from Bellevue, ID
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 126 of 186 people found this instruction helpful
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with tw... read more

Broil element wasn't working...

Broil Element – Part Number: 318255605
  • Customer: Kevin from Alexandria, VA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 78 of 98 people found this instruction helpful
I pulled my unit out of the wall and noticed that the insulation around the top broiler element was a bit brown. Closer inspection revealed that the element had shorted somehow to the oven itself and caused the element to become non-functional. I tried measuring the resistance first, and it was within typical values for the other elements, but I decided to... read more

Cord was not tightened enough by delivery crew.

  • Customer: Timothy from Spring Valley, AL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 82 of 123 people found this instruction helpful
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screw... read more