Models > PLEB30S9DCA

PLEB30S9DCA Frigidaire Wall Oven - Overview

Sections of the PLEB30S9DCA

[Viewing 5 of 5]

Manuals & Care Guides for PLEB30S9DCA

Click to download
Keep searches simple, eg. "belt" or "pump".
Oven Light Bulb – Part Number: 316538904
Oven Light Bulb
★★★★★
★★★★★
(5)
PartSelect #: PS12751166
Manufacturer #: 316538904
This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If...
$14.18
  In Stock
Temperature Sensor – Part Number: 316217002
Temperature Sensor
★★★★★
★★★★★
(11)
PartSelect #: PS820208
Manufacturer #: 316217002
The oven temperature sensor for your range may also be called a probe. The quick connect on this part may differ than your original piece. If the temperature sensor does not fit you will have to cut o...
$44.53
  In Stock
Main Terminal Block Kit – Part Number: 5304409888
Main Terminal Block Kit
★★★★★
★★★★★
(11)
PartSelect #: PS471605
Manufacturer #: 5304409888
Terminal block kits are also known as terminal boards, or terminal strips, and they are found in a wide variety of household appliances. Most often in ranges, wall ovens, and dryers. This kit attaches...
$8.53
  In Stock
Light Bulb Lens – Part Number: 318406100
Light Bulb Lens
★★★★★
★★★★★
(5)
PartSelect #: PS2349721
Manufacturer #: 318406100
The Frigidaire light bulb lens covers the interior light bulb in an oven. No tools are necessary to replace this item. After unplugging the appliance, slide off the wire bracket to remove the existing...
$34.33
  In Stock
Door Hinge – Part Number: 318024747
Door Hinge
PartSelect #: PS2345318
Manufacturer #: 318024747
This hinge is located on each side of the oven door.   No Longer Available
Broil Element – Part Number: 318255605
Broil Element
★★★★★
★★★★★
(6)
PartSelect #: PS3506411
Manufacturer #: 318255605
This broil element is found on the roof of the oven and heats food. The most common reasons you would need to replace this part is due to the oven not giving off enough heat, not turning on, or not ba...
$135.03
  In Stock
Inner Oven Door Glass – Part Number: 316117500
Inner Oven Door Glass
★★★★★
★★★★★
(4)
PartSelect #: PS439086
Manufacturer #: 316117500
This inner oven door glass, also called an oven heat barrier glass, is a transparent and heat resistant sheet of glass that fits into your oven or range. While containing the heat, the sheet of glass ...   No Longer Available
Bake Element - 3400W – Part Number: 318254906
Bake Element - 3400W
★★★★★
★★★★★
(10)
PartSelect #: PS1992188
Manufacturer #: 318254906
This bake element is found on the bottom of the oven.
$158.56
  In Stock
Steel Washer – Part Number: 316008401
Steel Washer
PartSelect #: PS436497
Manufacturer #: 316008401
This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter inch inner diameter....
$8.73
  In Stock
Broiler Pan Grate Insert – Part Number: 5304494997
Broiler Pan Grate Insert
★★★★★
★★★★★
(3)
PartSelect #: PS9864838
Manufacturer #: 5304494997
This includes pan and insert.
$51.17
  In Stock

Questions And Answers for PLEB30S9DCA

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the PLEB30S9DCA

[Viewing 7 of 7]
Little to no heat when baking
Fixed by
these parts
Show All
Element will not heat
Fixed by
these parts
Show All
Door won’t close
Fixed by
these parts
Show All
Oven is too hot
Fixed by
these parts
Show All
Will Not Start
Fixed by
these parts
Show All
Oven not heating evenly
Fixed by
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven not heating to desired temperature
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven and attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
Parts Used:
Temperature Sensor
  • Dan from Bellevue, ID
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
137 of 202 people found this instruction helpful.
Broil element wasn't working...
I pulled my unit out of the wall and noticed that the insulation around the top broiler element was a bit brown. Closer inspection revealed that the element had shorted somehow to the oven itself and caused the element to become non-functional. I tried measuring the resistance first, and it was within typical values for the other elements, but I decided to replace the element anyway.

I ordered from PD and the part arrived just a few days letter by regular shipping. I undid the screws holding in the element, undid the wire connectors and replaced the broken element with the new one. The element worked like a charm and I was back in business for cooking.
Parts Used:
Broil Element
  • Kevin from Alexandria, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
85 of 105 people found this instruction helpful.
Cord was not tightened enough by delivery crew.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
Parts Used:
Main Terminal Block Kit
  • Timothy from Spring Valley, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
87 of 130 people found this instruction helpful.