Models > PHB920EJ6ES

PHB920EJ6ES General Electric Range - Overview

Sections of the PHB920EJ6ES

[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Temperature Sensor – Part Number: WB21X22134
Temperature Sensor
★★★★★
★★★★★
(48)
PartSelect #: PS10059162
Manufacturer #: WB21X22134
The temperature sensor, also known as the oven temperature sensor assembly is usually found in the back of the oven. The function of the oven temperature sensor assembly is to measure the temperature ...
$38.48
  In Stock
REAR SUPPORT – Part Number: WB02X33180
REAR SUPPORT
★★★★★
★★★★★
(20)
PartSelect #: PS12709839
Manufacturer #: WB02X33180
This rear drawer support comes with the installation screw. This part has been redesigned. The new support inserts towards the rear of the drawer as opposed to the side.
$13.07
  In Stock
Foot - Leveller – Part Number: WB02X10521
Foot - Leveller
PartSelect #: PS223802
Manufacturer #: WB02X10521
Sold individually.
$23.47
  In Stock
Range Oven Door Gasket – Part Number: WB04T10086
Range Oven Door Gasket
★★★★★
★★★★★
(11)
PartSelect #: PS8753695
Manufacturer #: WB04T10086
The oven door gasket creates a seal between the oven door and the opening of the oven to prevent heat from escaping when the oven is closed.
$51.57
  In Stock
Screw – Part Number: WH2X930
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS271689
Manufacturer #: WH2X930
This screw is sold individually.
$12.24
  In Stock
Front Drawer Support – Part Number: WB48T10013
Front Drawer Support
★★★★★
★★★★★
(1)
PartSelect #: PS249583
Manufacturer #: WB48T10013
$8.08
  In Stock
Window Pack Assembly – Part Number: WB56T10105
Window Pack Assembly
★★★★★
★★★★★
(14)
PartSelect #: PS773379
Manufacturer #: WB56T10105
$176.69
  In Stock
Screw – Part Number: WB1M1
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS234320
Manufacturer #: WB1M1
Sold Individually.
$7.77
  In Stock
Terminal Block Kit – Part Number: WB17T10011
Terminal Block Kit
★★★★★
★★★★★
(13)
PartSelect #: PS953027
Manufacturer #: WB17T10011
This part provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).
$56.83
  In Stock
SCREW 10-32 TR T – Part Number: WB01T10008
SCREW 10-32 TR T
★★★★★
★★★★★
(2)
PartSelect #: PS222157
Manufacturer #: WB01T10008
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to con...
$12.22
  In Stock
Screw – Part Number: WB1K5157
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS234226
Manufacturer #: WB1K5157
This screw is black in color and sold individually.
$8.79
  In Stock
SCREW – Part Number: WB1X536
SCREW
PartSelect #: PS234785
Manufacturer #: WB1X536
$9.70
  In Stock

Questions And Answers for PHB920EJ6ES

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the PHB920EJ6ES

[Viewing 7 of 7]
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven would go in to a F2 Error
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
Parts Used:
Temperature Sensor
  • Peter from stamford, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
143 of 206 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
terminal block melted
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
Parts Used:
Terminal Block Kit
  • jonathan from willow springs, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
53 of 68 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven wouldn't preheat above 300 degrees
Unplugged appliance and removed 5 screws on back of stove/oven and removed plate. Disconnected the sensor and unscrewed it on the inside of the oven. Pulled the cord through and replaced with new sensor. Replaced all parts and plugged in the appliance and tested. Worked great.
Parts Used:
Temperature Sensor
  • Gerald from Cape Canaveral, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
48 of 78 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!