PGM304-1 Dacor Range - Overview

The rubber feet, also known as the burner grate foot, is used on the bottom of gas burner grates for a range and cooktop. The rubber feet help the grates sit on the top of a burner cap properly and works to keep it leveled. This way you can place your pans and pots on an even surface. This part also prevents your burner grates from scratc...Read morehing and damaging the top of your stove. This can lead to friction and the paint on the stove top can chip. Make sure to unplug range from power source before installing this part.

A burner that clicks without lighting?or does not spark at all?may have a problem in the ignition system. The replacement spark module provides the electrical pulses that travel to the burner electrodes and ignite the released gas. Replacement may be needed when sparks remain weak, delayed, or absent after the electrodes, switches, wiring...Read more, burner caps, and gas supply have been checked. Several faults can cause the same symptoms, so proper testing is important. Turn off electrical power and close the gas valve before service. Reconnect wires exactly as shown in the appliance diagram, and check for gas leaks using an approved method before operating the appliance.

Lights that blink, appear weak, or stay dark may have a damaged LED unit or connection. This replacement service kit supplies the lighting components and basic fasteners used in select cooking appliances. Correct installation can return normal light to the area served by the original assembly. First check the light switch, connectors, and...Read more wiring for damage or looseness. Turn off the circuit breaker and confirm the appliance has no power before service. Keep track of each screw and washer, and do not pinch the wires during reassembly. Since similar appliances may use different LED designs, confirm the kit against the complete model and service diagram.

This is a Genuine OEM Delonghi replacement part, this item is sold individually. Designed to work with specific Dacor Cooktops. This knob is made out of Black Plastic. To replace simply push it firmly on the control shaft.