My Orders
PE-3100 (Type 1E -After S/N 001001) Echo Edger - Overview
Diagrams for PE-3100
See every part. Know exactly what you need.
_WW_1.gif "Page A Diagram and Parts List for Type 1E -After S/N 001001 Echo Edger")
_WW_2.gif "Page B Diagram and Parts List for Type 1E -After S/N 001001 Echo Edger")
_WW_3.gif "Page C Diagram and Parts List for Type 1E -After S/N 001001 Echo Edger")
_WW_4.gif "Page D Diagram and Parts List for Type 1E -After S/N 001001 Echo Edger")
_WW_5.gif "Page E Diagram and Parts List for Type 1E -After S/N 001001 Echo Edger")
_WW_6.gif "Page F Diagram and Parts List for Type 1E -After S/N 001001 Echo Edger")
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$6.40
In Stock
Trimmer Fuel Grommet
Part #13211546730
This is a genuine ECHO/Shindaiwa replacement part It is compatible with over 150 machines listed below. The Fuel Line Grommet is placed into the fuel tank. The Vent tube, Fuel return line and fuel line are inserted through the three holes. A worn Fuel Line Grommet will cause fuel to leak from the tank. When replacing the Grommet it is advisable to replace the fuel lines at the the same time.
$7.73
In Stock
Fuel Filter
Part #A369000480
This OEM Fuel Filter is a silver and white, steel/felt, part measuring about 1.25 inches in length and 3/4 inch wide. It can be installed with pliers and is rated as Easy to install by customers.
This part attaches inside the fuel tank to clean the fuel of debris, and should be replaced during regular maintenance, check your manual for ...Read morerecommended replacement time. If the filter is leaking or it has a blockage preventing fuel flow, then it should be replaced. If the engine sounds like it is not getting enough fuel, then remove the filter and check it for blockage.
Read less
$6.88
In Stock
Purge Bulb
Part #12318140630
The Primer Pump, aka the Pump Bulb, is a clear, individually sold, plastic part, sourced from the original equipment manufacturer. It has an Outer Diameter of 0.616 Inches, 15.66mm and is 0.558 Inches and 14.19mm in height. This part is used to pump fuel from the tank to the carburator and is rated Easy to install.
This part installs on...Read moreto the primer assembly. If the part dries out or starts leaking that means it is broken (likely due to fatigue or general wear) and must be replaced. Check the model number to ensure you are choosing the right part.
Read less
$6.40
In Stock
Trimmer Fuel Return Tube
Part #13201056330
The fuel return tube or fuel return line, as it is also known, delivers fuel back to the tank from the primer bulb. This is a genuine OEM part from the manufacturer, and it is yellow in color and sold individually. Its overall dimensions are 3x6x90mm. Over time, or due to over-tightening, cracks may appear in your fuel return tube, causin...Read moreg fuel to leak. You will know it is time to replace this part if you notice these symptoms.
This is an easy repair, according to our customers, and does not require any special tools. The new part will simply attach to the primer bulb and fuel tank.
Read less
$10.97
In Stock
Leaf Blower Fuel Tank Vent
Part #A356000031
This a a genuine OEM replacement check valve for your small engine. It is also known as a fuel tank vent. You may need to replace this part if you are noticing debris or dirty oil in the reservoir. Make sure the engine is cool before you begin this repair, and remove the wire and boot from the spark plug to prevent the engine from starting up.
$6.40
In Stock
Fuel Line
Part #V471001191
This fuel pipe or fuel line is designed to deliver fuel to the carburetor from the fuel filter inside your tank. It is black in color, made of rubber, and its dimensions are 3x5x180mm. The fuel line is sold individually. If you notice fuel leaking from your fuel line, it could be cracked due to wear or drying out, and will need to be repl...Read moreaced.
Our customers rated this repair as easy, it does not require any special tools. Attach the new fuel line inside the tank onto the fuel filter and the carburetor.
Read less
$10.01
In Stock
Air Filter
Part #13031051830
Genuine Echo Replacement part, this item is sold individually. The 13031051830 Air Filter is used to keep dust and debris from contaminating the carburetor and engine. This filter is used on all the Echo Outdoor Products listed below. When this Filter gets clogged and dirty it will diminish the performance of the engine. It should be replaced at this time.
$6.06
In Stock
Trimmer Clip
Part #13201309820
This genuine fuel clip is a silver, metal, individually sold part. It can be installed with pliers and is rated as Easy to install by customers.
This part attaches to the fuel filter to secure the fuel line ot the fuel filter. If broken, likely due to fatigue, there may be a fuel leak. If damaged or missing, the part should be replaced. ...Read moreRefer to your owners manual or model number to ensure you are choosing the correct part.
Read less
$6.40
In Stock
Throttle Trigger
Part #17801052130
This is an OEM replacement part, it is sold individually. The Throttle Trigger controls the speed of the engine of the models listed below. The throttle cable connects to the trigger, then down to the throttle lever on the carburetor. Because of its constant use the Throttle Trigger has a tendency to break or wear out.
$6.40
In Stock
Trimmer Screw
Part #90016204012
This is a genuine manufacturer sourced replacement part designed for use with trimmers/edgers. This screw is a standard hardware which has multiple applications based on your tool. It is made out of metal and it is sold individually. Requires a hex key/allen wrench to tighten/loosen this screw.
$17.88
In Stock
Trimmer Cutter Blade
Part #69601552632
The Cutter Blade (or Cutting blade) is a 7-3/4 inch, silver, metal blade which comes sold in a set of two. They require pliers, and a socket set to install and are rated as "Easy" to install by users. These blades are used for edging level ground sidewalks and driveways. If the part is broken or damaged due to wear from general use, they ...Read morewill become dull and will need to be sharpened or replaced. They attach to the cutting shaft. Refer to your make, model and diagrams to ensure this is the correct part.
Read less
$6.55
In Stock
Split Pin 2 X 22
Part #90030020022
The Cotter Pin (or Split Pin) is a 2x22mm silver metal part, sold individually. It is rated as "Easy" to install, and installation will require a set of pliers. It can be attached in various locations on a variety of equipment and is used to secure and lock parts in place. If broken, damaged, or worn down the part it is securing may becom...Read moree loose, and the part should be replaced. If this part is removed for repairs, replace it with a new one. Refer to your make, model, and diagrams to make sure this is the correct part.
Read less
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Won't Start
1 person
found this instruction helpful.
I ordered the exact parts for my exact unit from the exploded view diagram provided by Parts Select Website. When the parts arrived the Tune Up kit's fuel filter was the incorrect size. The part listed on their website is incorrect, I only ordered based on the information provided on Parts Select Website. When I requested a refund via Par
... Read more
ts Select email address. I never heard another word from them. I had to open dispute from my credit card company.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!