PCHB920SJ1SS General Electric Range - Overview

Diagrams for PCHB920SJ1SS

See every part. Know exactly what you need.

Parts for the PCHB920SJ1SS

$30.53

Temperature Sensor

★★★★★

(56)

Part #WB21X22134

The temperature sensor, also known as the oven temperature sensor assembly is usually found in the back of the oven. The function of the oven temperature sensor assembly is to measure the temperature inside your oven while it is on and send the temperature back up to the electronic control, which adjusts as necessary. If your oven is havi...Read more

Read less

$16.05

REAR SUPPORT

★★★★★

(23)

Part #WB02X33180

This genuine GE drawer support is an original replacement part sourced from the manufacturer and is designed for use with electric ranges. Made of durable plastic, it attaches to the rear of the drawer and provides stable support by securing the rear side in place. This part includes the necessary mounting screw for installation and is so...Read more

Read less

$55.21

Range Oven Door Gasket

★★★★★

(13)

Part #WB04T10086

The oven door gasket creates a seal between the oven door and the opening of the oven to prevent heat from escaping when the oven is closed.

$25.26

Foot - Leveller

Part #WB02X10521

Sold individually.

$16.05

Screw

★★★★★

(1)

Part #WH2X930

This screw is sold individually.

$311.77

Window Pack Assembly

★★★★★

(24)

Part #WB56X22160

This window pack assembly, also known as inner door glass, is supplied directly by the manufacturer for use in range ovens. It has measurements of approximately 22 inches by 14 inches. The inner door glass is situated between the outer door panel and the oven cavity. It acts as a barrier between the heat generated by the oven and the exte...Read more

Read less

$16.05

Front Drawer Support

★★★★★

(1)

Part #WB48T10013

$64.77

Terminal Block Kit

★★★★★

(13)

Part #WB17T10011

This part provides a way of connecting individual electrical wires and offers protection of the device from electrical surges (voltages and/or currents).

$16.05

Range Screw

★★★★★

(2)

Part #WB01T10008

This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to connect the different parts of your oven door. This part is an authentic OEM part sourced directly from the manufacturer.

$40.54

Bottom Drawer Guide

★★★★★

(1)

Part #WB48T10068

$15.00

Screw

★★★★★

(1)

Part #WB1K5157

This screw is black in color and sold individually.

$16.05

Spacer

★★★★★

(1)

Part #WB02X38986

Questions And Answers for PCHB920SJ1SS

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Colin - For model number PCHB920SJ1SS

September 18, 2022

this is an induction range-left side induction elements quit--followed a few days later by right side elements and oven and display-unit is totally dead-i have power to the control panel-nothing burnrd that i can see

Hi Colin, Thank you for your question. It sounds like you will need to replace the oven control and the overlay assembly. The part number listed under your model number for the oven control and overlay assembly is PS12725909. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

$446.03

OVEN CONTROL AND OVERLAY ASM

Was this helpful?

Common Symptoms of the PCHB920SJ1SS

How this model fails, and the parts that fix it.

Little to no heat when baking

Fixed by
these parts

Show All

Oven not heating evenly

Element will not heat

Show All

Little to no heat when broiling

Fixed by
these parts

Show All

Videos related to models starting with PCHB920SJ1SS

Watch our pros, then fix it yourself.

Replacing the Temperature Sensor

Replacing the Window Pack Assembly

Replacing the Foot - Leveller

Replacing the MAINTOP STRIKE

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Oven would go in to a F2 Error

148 of 226 people found this instruction helpful.

Peter from stamford, CT
Really Easy
15 - 30 mins
Nutdriver

Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.

Was this helpful?

terminal block melted

56 of 77 people found this instruction helpful.

jonathan from willow springs, IL
Easy
Less than 15 mins
Nutdriver, Screw drivers

The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. U ... Read more

Read less

Was this helpful?

Oven wouldn't preheat above 300 degrees

54 of 95 people found this instruction helpful.

Gerald from Cape Canaveral, FL
Really Easy
15 - 30 mins
Nutdriver

Unplugged appliance and removed 5 screws on back of stove/oven and removed plate. Disconnected the sensor and unscrewed it on the inside of the oven. Pulled the cord through and replaced with new sensor. Replaced all parts and plugged in the appliance and tested. Worked great.

Was this helpful?